Magic-Pak 60MGE812241NP 60k Btu Gas Heating 2 Ton Electric Cooling
- $4,978.43
Availability: In Stock
Brand: Magic-Pak
Product Code: 60MGE8-12-241NP
SKU: 60MGE8-12-241NP
Product views: 2814
Magic-Pak 60k Btu Gas Heating 2 Ton Electric Cooling. Gas Heating/Electric Cooling
Standard Features:
Electrical Connections and Guage Ports:
Line voltage knockouts (two concentric) to accommodate field required wire size.
Thermostat connections are located at the top of the cabinet .
Two gauge ports are located within the lower compartment of the unit.
Refer to Unit Dimension figure for additional details.
Cabinet:
Embossed galvanized steel cabinet.
Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation.
Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation.
Internal Filter:
Tool-less filter access.
Factory-installed 1 in. filter rack with washable filter.
Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied.
If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork.
Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details
Specifications:
Fully ducted system
0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton
15,000, 24,000, 36,000, 48,000 and 60,000 BTUH
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE
Individual metering and control for each unit
Easy plug-and-play-like install and service
Top supply and return
Nominal CFM at 0.5” W.C.
<2.0% cabinet air leak
Pre-wired and pre-charged
Factory installed evaporator drain float switch
Direct vent/sealed combustion
Standard stainless steel heat exchanger
Dimensions: 59 7/8" H 24 3/8" D 28 W.
Weight: 301 lb.
Warranty;
5-year limited warranty on all parts.
20-year warranty on stainless steel heat exchanger.
Magic-Pak 60k Btu Gas Heating 2 Ton Electric Cooling. Gas Heating/Electric Cooling
Standard Features:
Electrical Connections and Guage Ports:
Line voltage knockouts (two concentric) to accommodate field required wire size.
Thermostat connections are located at the top of the cabinet .
Two gauge ports are located within the lower compartment of the unit.
Refer to Unit Dimension figure for additional details.
Cabinet:
Embossed galvanized steel cabinet.
Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation.
Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation.
Internal Filter:
Tool-less filter access.
Factory-installed 1 in. filter rack with washable filter.
Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied.
If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork.
Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details
Specifications:
Fully ducted system
0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton
15,000, 24,000, 36,000, 48,000 and 60,000 BTUH
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE
Individual metering and control for each unit
Easy plug-and-play-like install and service
Top supply and return
Nominal CFM at 0.5” W.C.
<2.0% cabinet air leak
Pre-wired and pre-charged
Factory installed evaporator drain float switch
Direct vent/sealed combustion
Standard stainless steel heat exchanger
Dimensions: 59 7/8" H 24 3/8" D 28 W.
Weight: 301 lb.
Warranty;
5-year limited warranty on all parts.
20-year warranty on stainless steel heat exchanger.
Thumb | File information |
MGE Specs.pdf File Size 1.45MB Downloaded: 93 | |
MGE Install Manual.pdf File Size 2.32MB Downloaded: 77 | |
Brochure.pdf File Size 17.87MB Downloaded: 53 |
Reviews
There are no reviews for this product.