Magic-Pak 5MHP4-12-121FP 1 Ton Electric Heat Pump Packaged Unit

$4,800.00

Residential Delivery

Availability: In Stock

Brand: Magic-Pak

Product Code: 5MHP4-12-121FP

SKU: 5MHP4-12-121FP

Product views: 859

Product Accessories

Image	Product	Price	Quantity	Action
	Magic-Pak ASLEEVE6-1 Wall Sleeve	$299.50
	Magic-Pak ASLEEVE8-1 Wall Sleeve	$295.60
	Magic-Pak ASLEEVE10-1 Wall Sleeve	$321.92

Magic-Pak 5 KW 1-Ton Electric Heat Pump Packaged Unit

Description:

MagicPak units are designed for use in all multifamily applications, such as: apartments, condominiums, student housing and senior living
Installation in conditioned and unconditioned mechanical spaces

General Features:

Factory shipped ready for top supply and return duct connections
Return air may be brought in through the optional front return opening
NOTE: If ductwork is attached to the optional front return opening, provisions to service unit filter must be provided
NOTE: Filter may need to be relocated to a suitable location outside the cabinet for ease of service
Ducted or free/non ducted return configuration, which may utilize the top or front as return points
Front access panel doubles as cover for top return (except 3.0 ton)
Line voltage knockouts (two concentric) to accommodate field required wire size
Thermostat connections are located at the top of the cabinet
Two gauge ports are located within the lower compartment of the unit
Refer to Unit Dimension figure for additional details
Embossed galvanized steel cabinet
Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation
Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation
Tool-less filter access
Factory-installed 1 in. filter rack with washable filter
Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied
If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork
Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details
Dedicated blower speed taps for continuous fan, cooling, and heating operation are programmed for optimal airflow and controlled by 24V thermostat signals
Blower speed adjustment is easily accomplished by speed tap selection
Fixed blower delays have been selected to enhance comfort
Refer to Blower Performance tables for additional details
Heavy duty, fully enclosed and weatherproof
Aluminum fan blades

Specifications:

Cooling Capacity	12000 Btu/hr
SEER	12
Heat Kit	5 KW
Voltage	208/230V, 60 Hz, 1 Ph
Rated Load Amps (RLA)	5.1
Locked Rotor Amps (LRA)	27
Nominal RPM	1125
Rated HP	1/8
Refrigerant	R-410A