-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Magic-Pak 7MHP4-12-241FP 2 Ton Cooling Electric Heat Pump Packaged Unit
Magic-Pak 7MHP4-12-241FP 2 Ton Cooling Electric Heat Pump Packaged Unit
General specs
- Product code7MHP4-12-241FP
- ManufacturerMagic-Pak
- SKU7MHP4-12-241FP
Dimensions
- Dimensions24.37in x 28.00in x 55.87in
- Weight268.00lb
Electric Heat Pump - 7kw Heater, 2 Ton Heat/Cool
Features:
Fully ducted system
Cooling capacity of 0.75 - 3.0 tons
Heat pump heating range of 8,600 - 31,000 BTUH
Electric heat range of 3 - 10 kW
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 8.0 HSPF/6.7 HSPF2
Individual metering and control for each unit
Easy plug-and-play-like install and service
Top supply and return
Nominal CFM at 0.5” W.C.
<1.4% cabinet air leak
Pre-wired and pre-charged
Factory installed evaporator drain float switch
Factory installed ventilation air capabilities
Optional epoxy coated coils
Fully ducted system
Cooling capacity of 0.75 - 3.0 tons
Heat pump heating range of 8,600 - 31,000 BTUH
Electric heat range of 3 - 10 kW
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 8.0 HSPF/6.7 HSPF2
Individual metering and control for each unit
Easy plug-and-play-like install and service
Top supply and return
Nominal CFM at 0.5” W.C.
<1.4% cabinet air leak
Pre-wired and pre-charged
Factory installed evaporator drain float switch
Factory installed ventilation air capabilities
Optional epoxy coated coils
Specifications:
Cooling Capacity | 24000 BTU |
EER Rating | 11 |
Electric Heat | 7KW |
Frequency Rating | 60 Hz |
Material | Steel |
Refrigerant Type | R-410A |
Series | MHP4 |
Voltage Rating | 208/230 VAC |
Dimensions:
Product Height (in.): 55.87”
Product Width (in.): 28”
Product Depth (in.): 24.37”
Unit Weight: 268 lbs.
Warranty:
5-year limited warranty on all parts
5-year limited warranty on all parts