-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Vert-I-Pak VHA18K50RCQ 1.5 Ton Heat Pump, R-32, 12.1 SEER2, 5.0kW
$3,738.00
Product code:VHA18K50RCQ
Product available

Vert-I-Pak VHA18K50RCQ 1.5 Ton Heat Pump, R-32, 12.1 SEER2, 5.0kW
$3,738.00
General specs
- Product codeVHA18K50RCQ
- ManufacturerFriedrich
- SKUVHA18K50RCQ
Dimensions
- Dimensions (L x W x H)23.00in x 23.00in x 47.00in
- Weight147.00 lb
Technical Specifications
- Airflow 560 CFM
- Compressor LRA 40
- Compressor RLA 7.8 / 7.4
- Cooling Capacity 17,800 Btu
- EER2 10.6
- Fan Motor 1/5 HP
- Heater Size 5.0 kW
- Heating Capacity 16,400 Btu
- HSPF2 6.7
- Refrigerant R-32
- SEER2 12.1
- Voltage 208/230 / 1 Phase, 60 Hz
Vert-I-Pak VHA18K50RCQ 1.5 Ton Single Package Vertical Heat Pump, R-32, 12.1 SEER2, 5.0kW
Description:
- NEW Vert-I-Pak® “Q series” R-32 single package heat pumps.
- The Q Series includes all of the legacy features of Vert-I-Pak® that our customers have enjoyed, such as ease of installation, now combined with higher efficiencies, increased performance levels, and exciting new features.
- Additionally, the New Q series maintains the existing Vert-I-Pak® footprint, making replacements as easy as ever.
- All models will now be rated as a commercial air conditioner (AHRI 210/240) with SEER2 and HSPF2 as required by The Department of Energy.
- As part of HSPF2 testing, these units will be able to provide efficient heat pump operation at lower temperatures (17°F) than the former series.
General Features:
- Compatible with wired and wireless energy management systems
- Completely self-contained
- Vibration isolators mounted under the chassis mounting feet
- Unique free-floating chassis
- Quick connect condensate line
- Compressor is locked out when electric heat is called for or energized
- Integrated emergency heat override switch to allow the operation of the resistance heater in the event of compressor failure
- Standard safety power disconnect
- Electronic control panel on unit for easy diagnostics and servicing
- All units are shipped palletized with return air filter installed
- 24-volt remote thermostat ready
- 10" crimped and beaded duct-collar ready to attach flex duct
- Easy-to-connect, right or left drain connection
- Non-rigid plenum to chassis connection to isolate vibrations to the building
- Corrosion resistant interior
- Easy-to-install front, left, or right hand into closet
- Two fan speed control from wall thermostat (RT7)
- Diamonblue Advanced Corrosion Protection® on the outdoor coil provides added endurance and protection in coastal or corrosive environments