Unico WON1502-C Electric Heater, 15kw Single Phase
- $1,510.20
Description:
UNICO | WON1502-C
- Nominal Capacity: 51,180 Btu/hr (15.0 kW)
- Power Supply: 230/1/60
- Certifications: ETL
Features:
The electric furnace module can be attached directly to one of our blower units or it can be installed in the supply air duct downstream from the blower unit as a duct heater. This model is rated for 15 kw at 240 volts single phase. The heater contains 2 circuit breakers as disconnects and one 15 amp breaker to power the blower unit. There are multiple safety's built in such as a pressure air proving switch, fan relay switch, auto temperature limit and fuse links. The heater comes with a 10" round start collar and a 11.5" square start collar.
- NEW (Revision C) – more efficient DC contactors
- NEW (Revision C) – full disconnection when off
- Galvanized insulated sheet metal cabinet enclosure
- Can be converted to a duct heater
- Magnetic de-energizing contactors for each element
- Line level auto limit primary safety set @ 165 °F (74 °C)
- Line level fuse link back-up safety
- Fan interlock control, fan signal proving switch
- Low air flow pressure switch
- Circuit breakers on all units
- Time delay sequencers for a gradual “stepped” power draw (softer start)
- Low voltage terminal strip (24 volt control)
- Specially designed tight cabinet for small duct, high velocity systems
- Single Supply (all units) or dual supply (15 and 20kW)
Thumb | File information |
Electric Furnaces Unico Specifications.pdf File Size 541.09KB Downloaded: 363 |
Reviews
There are no reviews for this product.