FREE SHIPPING on orders over $100 to Eastern United States!
 

Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM

  • $843.17

Add to Wish List

Compare this Product

Availability: In Stock

Brand: Frigidaire

Product Code: KG7SA-054C-T23A1

SKU: KG7SA-054C-T23A1

Product views: 140

Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM


Description:


  • The gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. 

  • The rounded corner jacket provides a pleasing “appliance appearance.”


General Features:


  • Variable Speed Direct Drive Blower - Energy-efficient, brushless DC (ECM) motor controls airflow to provide better temperature control, humidity control and air distribution.

  • 100% fired and tested - All units and each component are tested on the manufacturing line.

  • Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.

  • 30 second blower delay - At start-up assures a warm duct temperature at furnace start-up. 

  • Adjustable blower off settings (60, 90, 120 and 180 seconds).

  • 30 second post purge - Increases life of heat exchanger.

  • Two Stage Inducer - Optimizes efficiency on first stage heat and reduces sound levels.

  • Hot surface igniter - Innovative application of a silicon nitride type igniter. 

  • Utilizes proven Smartlite® technology.

  • Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.

  • Flexible category IV venting system - May be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation.

  • High Static Blowers - All models equipped with high static blowers.

  • Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.

  • Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life.

  • 60 second fixed cooling cycle blower-off delay (TDR) - Increases cooling performance when matched with a Nortek Global HVAC coil.

  • LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.

  • Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.

  • Incorporates integrated control board - With connections for electronic air cleaner and humidifier. 

  • Ergonomically located for ease of service.

  • Two piece door design - Enhances furnace appearance and uses captured screws to prevent losing door screws.

  • Blower Compartment - Sealed door to reduce air leakage and insulated for ultra quiet operation.

  • Sealed Vestibule - Reduces burner and inducer sound levels.

  • Furnace Air Leakage - These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%. 

  • Keep the conditioned air flowing to where it's needed.


Specifications:


Input Heating Capacity

54,000 Btu/h

Stages

Single-Stage

AFUE

80.0%

Cooling Airflow

2-3 Tons

Motor H.P

1/2

Speed

5

Type

ECM

Motor FLA

6.4

Rated Ext. SP - In. W.C.

0.50

Temperature Rise Range - F

30-60


Dimensions:


Product Height (in.): 34.5”

Product Width (in.): 14.25”

Product Depth (in.): 28”

Shipping Weight: 95 lbs.


Thumb File information
pdf-50x50.png Specification Sheet.pdf 569.53KB 14
pdf-50x50.png Installation Manual.pdf 2.43MB 11

Reviews

There are no reviews for this product.

  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM

Total Reviews (0)
click here write review to add review for this product.