-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Zoeller Pumps M82-0001 Dewatering & Sump Pedestal Pump
$472.66
Product code:M82-0001
Product available
Zoeller Pumps M82-0001 Dewatering & Sump Pedestal Pump
$472.66
General specs
- Product codeM82-0001
- ManufacturerZoeller Pumps
- SKUM82-0001
Dimensions
- Dimensions0.00in x 9.55in x 31.75in
- Weight19.00 lb
Technical Specifications
- Amps 4.0 A
- Brand Zoeller Pumps
- Capacity 197 Liters
- Cord 7.5 Feet
- Discharge Size 1-1/4" (1.25") FNPT
- Flow Rate 52 GPM
- Power 1/3 HP
- Voltage 115 V
Zoeller Pumps M82-0001 Dewatering & Sump Pedestal Pump
Description:
- Pedestal pump for dewatering and sump applications
- Nicknamed "Old Faithful"
- Ideal for basement and low-lying sump and dewatering applications
- Pedestal style designed for narrow and small diameter pumping applications
- Intended for indoor use
- Motor mounted above pit cover for protection from water, spray, and high humidity
- Not intended for use with flammable liquids
Features:
- Metal enclosed, 115 V split phase motor
- Permanently lubricated
- Thermal overload protected
- Heavy duty thermoplastic or cast iron pump housing and base
- Top intake strainer integrated into pump housing, passes lint
- No separate strainer to maintain or clean
- Model 81: 1-1/4" FPT discharge
- Models 82 & 84: 1-1/2" FPT discharge
- High impact PVC (1-1/2" OD) column
- Non-corrosive shaft
- Reliable positive displacement switch
- Chemically resistant polyethylene float
- Plated steel float rod
- Nylon guide
- Permanently lubricated upper sleeve bearing
- Durable lower bronze bushing
- Adjustable 12" cycle, factory set at 9"
- Maximum on level: 16" (41 cm)
- Minimum off level: 4" (10 cm)
- Temperature rating: 130°F (54°C)
- Minimum recommended pit size: 18" x 22"
- Model 81: Thermoplastic construction, 1/3 HP