-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Utility 12-730 TFE-TITE PTFE Thread Compound
$16.00
Product code:12-730
Product available

Utility 12-730 TFE-TITE PTFE Thread Compound
$16.00
General specs
- Product code12-730
- ManufacturerUtility Wonder Products
- SKU12-730
Dimensions
- Dimensions0.00in x 0.00in x 0.00in
- Weight0.46 lb
Utility 12-730 TFE-TITE PTFE Thread Compound
Description:
- TFE-TITE is an FBC approved* thread sealant containing PTFE (polytetrafluoroethylene) and contains no VOCs, no PFOA and no lead, and never did.
- It withstands temperatures from -200ºF. to +500ºF. and pressures to 10,000 psi.
- Meets Fed. Spec. TT-S-1732.
- It is non-staining, non-toxic, non-conductive, non-corrosive, non-flammable, non-drying & non-hardening and is bright white with a wide variety of uses.
- Use on threaded and flanged joints in lines carrying high pressure steam, oil, gasoline, most other solvents, various gases, and refrigerants.
- It is also effective for acids, alkalis, water, and fuels.
- TFE-TITE is an effective sealant for alcohols (ethanol, methanol, amyl alcohol, glycerine), aldehydes (formaldehyde), castor oil, sulfonated oils (turkey red oil), turpenes (turpentine), salts and salt water (sodium acetate, sodium bisulfate, sodium chloride, sodium nitrate, sodium sulfate, sodium sulfite, ammonium chloride, copper chloride), refrigerants (Freon 11, 12 & 22), gases (propane, butane, natural, illuminating).
- NOT FOR USE ON OXYGEN LINES.
Directions:
- Stir contents before use.
- Thoroughly clean surface of dirt, grease and oil.
- Apply to male threads with brush.
- When used on gaskets, coat both sides.
- Permits using gaskets several times.
- On high temperature applications, apply to threads at ambient temperature.