Unico WON2002-C Electric Furnace, 20kw Single Phase

Description:
UNICO | WON2002-C

• 24 inch
• Rated Capacity: 19.2
• Amperage @240V: 80.00
• Nominal KW Rating: 20
• Unico System Match-up: 3642 and 4860
• Min. Airflow CFM: 800 (0.38)

Features:

The electric furnace module can be attached directly to one of our blower units or it can be installed in the supply air duct downstream from the blower unit as a duct heater. This model is rated for 20kw at 240 volts single phase. The heater contains 2 circuit breakers as disconnects and one 15 amp breaker to power the blower unit. There are multiple safety's built in such as a pressure air proving switch, fan relay switch, auto temperature limit and fuse links. The heater comes with a 10" round start collar and a 11.5" square start collar.

• NEW (Revision C) – more efficient DC contactors 
• NEW (Revision C) – full disconnection when off 
• Galvanized insulated sheet metal cabinet enclosure 
• Can be converted to a duct heater 
• Magnetic de-energizing contactors for each element
• Line level auto limit primary safety set @ 165 °F (74 °C)
• Line level fuse link back-up safety
• Fan interlock control, fan signal proving switch
• Low air flow pressure switch
• Circuit breakers on all units
• Time delay sequencers for a gradual “stepped” power draw (softer start)
• Low voltage terminal strip (24 volt control)
• Specially designed tight cabinet for small duct, high velocity systems
• Single Supply (all units) or dual supply (15 and 20kW)