Spartan TE256 0-10v ECM Chilled Water Fan Coil Thermostat

The TE256 controller for a Fan Coil Unit is specifically designed to control a 6 port modulating valve for heating/cooling, and a variable airflow ECM fan.

Features

• Backlit display for clear readability
• Pre-set a whole week, 5-2, 5-1-1, or 7 day program that can be separate or whole week programmed for weekday and weekend with 4 daily schedules
• Modulates a 6 port ball valve to control heating/cooling output without the possibility of infiltration.
• Early fine tune function to ensure programmed temperature is reached by scheduled time
• 12- or 24- hour format with battery backed day and time
• The fan speed: The fan CFM is controlled by the room temperature and it will deliver continously the minimum CFM when the set point is reached
• CFM minimum and maximums are set on the room thermostat in ‘Engineer Mode’
• The ON/OFF button will turn the fan coil unit off and the valve will go to close position
• Room temperature or setpoint temperature selectable for display
• Full configurable parameters such as switching differential, cycle time, etc are set in ‘Engineer Mode’
• Proportional plus integral (PI) algorithm applied to modulating control
• 0 to 10 Vdc control signal output for direct / reverse acting output
• Optional Remote sensor (RS) input interface for connecting to remote temperature sensor
• Optional Energy Saving input (ESI) interface for connecting to hotel card key, occupied/unoccupied sensor, lighting interlock signal or window/door open detection to save energy
• Adjustable unoccupied setpoints for heating and cooling mode control
• Non-volatile memory (EEPROM) retains user settings during power loss with backup battery for 5 years
• Agency approval: CE directive 2004/108/EC
• Low voltage Class 2 as per UL/CSA standards
• Two year warranty