-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
SANCO2 ECO-200GLBK 200 Gallon High Efficient Commercial Storage Tank
SANCO2 200 Gallon High Efficient Commercial Storage Tank
Description:
ASME certified 200 Gallon Glass lined Tank
Steel powder coated exterior
High R value Insulation includes 125 Psig ASME approved Pressure Relief Valve
Dual Thermistor Thermal Wells.
Construction:
The tank shall be manufactured from mild steel with a baked on Cobalt enriched porcelain glass lining
Tank outer jacket shall be steel with a baked on powder coating for protection
Insulation:
A minimum of 1 7/8" insulation shall be sprayed on to the tank to reduce heat loss
Insulation shall not contribute to global warming
Connections:
Connections to the Hot and Cold building supplies shall be 2 1/2" NPT male type for the Hot Water Outlet and 2 1/2" Female NPT for the Cold Water Inlet
Cold Water supply to Heat Pump and Hot Water return from Heat Pump connections shall be 3/4" NPT Female type
Piping to Heat Pump and return from Heat Pump shall be 1/2" with 2 Heat Pumps connected to the tank
For systems with more Heat Pump units connected to the tank follow piping diagram supplied by ECO2 Systems
A 1" Female NPT Recirculation return connection shall also be provided on the tank
Controls:
The tank shall be supplied with two 91101-45190 Temperature sensors installed in two sensor wells to control two individual Heat Pumps
If more than two Heat Pumps shall be connected to the tank each additional Heat Pump shall requires it's own 91101-45190 Temperature Sensor
Additional sensors shall be field installed
Control wiring between Tank and Heat Pump shall require 16AWG shielded wire if longer than the wire supplied on the Heat Pump
Pressure and Temperature Relief:
Tank shall be supplied with a factory installed
ASME certified Pressure Relief valve
Pressure Relief Valve setting shall be 150 Psig
Specifications:
Type | Storage Tank |
Tank Volume Actual/Nominal | 200 Gallons |
Pressure Relief Valve (Psig & °F) | 125 Psig |
Temperature Sensor | Thermistor |
Anodes | 2 x Magnesium |
Cold Water Inlet | 2 1/2" Female NPT |
Hot Water Outlet | 2 1/2" Male NPT |
Cold Water to Heat Pump | 3/4" Female NPT |
Hot Water Return from HP | 3/4" Female NPT |
Max Pipe Length inc | 66ft |
Max Vertical Separation of | 23ft |
Dimensions:
Product Height (in.): 76.4”
Product Width (in.): 34”
Unit Weight: 872 lbs.
Warranty:
Five (5) years warranty.