-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Robertshaw STXR480Y05 Surge-Trap Series Surge Protective Device
Robertshaw STXR480Y05 Surge-Trap Series Surge Protective Device
General specs
- Product codeSTXR480Y05
- ManufacturerRobertshaw
- SKUSTXR480Y05
Dimensions
- Dimensions0.00in x 0.00in x 0.00in
- Weight0.00lb
Robertshaw STXR480Y05 Surge-Trap Series Surge Protective Device
Description:
The Mersen, distributed by Uni-Line, Surge-Trap Series Surge Protection Devices (SPD) safeguards residential air conditioning (A/C) units including mini-splits, furnaces, and air handlers from costly voltage surge events, such as fluctuations in power often generated from inside a home or building, and from an outside source like lightning.
Compact in size, the Surge-Trap Series provides Type 1 and Type 2 surge protection to help maintain safe, reliable A/C and furnace performance.
Model STXR480Y05 is used for Commercial and Industrial applications and is recommended for replacement of obsolete surge arrestors.
The STXR models are flexible in both line or load installation applications for branch panel or individual equipment protection.
General Features:
Designed with the industry leading Mersen TPMOV Technology
Compact footprint designed to mate with AC Disconnect Switches
Easy to read LED status indicator; flashes Green to show SPD is On; or the LED will be Out indicating SPD should be replaced
NEMA 4X enclosure for outdoor or indoor use
For use in ANSI/UL Type 1 or 2 SPD installations
3 Modes of Protection (L-N, L-L)
5-year warranty
Specifications:
Series Application | Surge Protective Device (SPD) |
Electrical Rating | 277/480V AC, 50/60 Hz, 3 Phase WYE |
Modes of Protection | 10 |
Surge Capacity | 50 kA |
Nominal Discharge Current | 20 kA |
Short Circuit Rating | 200 kA |
Flammability | UL94-5VA |
End-of-Life LED Indicator | Yes |
Wire Length | Pre-wired 18" 10 AWG |
Operating Temperature | -40°F to 185°F (-40°C to 85°C) |
Mounting Type | 1/2" - 14 threaded hub. Includes sealing locking washer. 1/2" knockouts with 18" leads |
Max. Continuous Operating Voltage | L-L 640, L-N 320, L-G 470, N-G 150; Note: L-N = Line to Neutral, L-L = Line to line, L-G = Line to Ground, N-G = Neutral to Ground |
Voltage Protection Rating | L-L 2000, L-N 1200, L-G 1800, N-G 700; Note: L-N = Line to Neutral, L-L = Line to line, L-G = Line to Ground, N-G = Neutral to Ground |