-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Robertshaw RS8110 Non-Programmable Thermostat 1H/1C
Robertshaw RS8110 Non-Programmable Thermostat 1H/1C
General specs
- Product codeRS8110
- ManufacturerRobertshaw
- SKURS8110
Dimensions
- Dimensions1.00in x 4.70in x 3.80in
- Weight0.00lb
Robertshaw RS8110 Non-Programmable Thermostat 1H/1C
Description:
Contractors can offer owners easy, yet powerful and reliable single-stage heating and cooling control in a simple, modern design with the RS8110 non-programmable wall thermostat.
General Features:
Large terminal blocks for easy installation
Universal sub-base
Quick-access menu button
Contractor/technician setup menu
Large, easy-to-read 4.6-square-inch blue backlit display
24V AC Powered OR Battery Operation (Included)
6 Year Limited Warranty
Easy-access front-load battery compartment
Adjustable temperature differential (swing) for energy optimization and maximum system life
Adjustable room temperature calibration
Adjustable setpoint limits
Five-minute selectable on/off compressor delay protection for short-cycling prevention
Separate O and B terminals
Specifications:
Series Application | Single-Stage 1 Heat / 1 Cool Non-Programmable |
Mounting Type | Wall or junction box |
System Fuel Source | Gas, electric or oil |
Heat Pump Compatibility | Systems without auxiliary or emergency heat |
Millivolt Application Compatibility | Yes |
Temperature Range | 41°F to 95°F (5°C to 35°C) |
Control Temperature | 44°F to 90°F (7°C to 32°C) |
Display Accuracy | ± 1°F (at 68°F) / ± 1°C (at 20°C) |
Power Source | 24V AC (18 to 30V AC), 50/60 Hz |
Terminals | Rh, Rc, C, Y, W, G, O, B |
Dimensions:
Product Height (in.): 3.8”
Product Width (in.): 4.7”
Product Depth (in.): 1”