-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Robertshaw 780U-DS20 Universal Direct Spark Ignition Module
Robertshaw 780U-DS20 Universal Direct Spark Ignition Module
General specs
- Product code780U-DS20
- ManufacturerRobertshaw
- SKU780U-DS20
Dimensions
- Dimensions0.00in x 0.00in x 0.00in
- Weight0.00lb
Robertshaw 780U-DS20 Universal Direct Spark Ignition Module
Description:
The Robertshaw 780U-DS20 Universal Direct Spark Ignition Module, part of the 780U Universal Series, is a versatile 24V ignition module designed for gas furnaces, boilers, water heaters, and commercial cooking equipment.
It offers customizable settings for trials, pre-purge, trial for ignition, inter-purge, and restart time, ensuring optimal performance across various applications.
This module is compatible with both natural and LP gas, and supports both single rod (local sense) and two rod (remote sense) flame sensing.
It can replace over 150 models, including those from Honeywell, White-Rodgers, and Fenwal.
The 780U-DS20 also includes a vent damper connection and LED indicators to display flame presence, strength, and system status or errors.
Applications include Gas furnaces, boilers, water heaters and commercial cooking..
General Features:
Configurable 24V ignition module
Selectable number of trials, pre-purge, trial for ignition, inter-purge and restart time
Replaces over 150 models including Honeywell, White-Rodgers, Johnson Controls and others
Flame sensing supports both single rod (local sense) and two rod (remote sense)
Compatible with both Natural and LP gas
Vent damper connection allows for connection to a vent damper
LED indicators provide troubleshooting and notifications for flame presence/strength and displays system status and errors
Specifications:
Series Application | Universal Direct Spark Ignition Module |
Input Power | 24VAC ± 4VAC 50-60 Hz |
Input Current | Max 0.25 A + Valve at 2A Max |
High Voltage Output | 15 KV with 50 pf load |
Spark Gap | 0.150 in ± 0.050 in (3.8 mm ± 1.2 mm) |
Flame Sensor Current | 0.5 Microamperes (uA) minimum |
Flame Failure Re-Ignition Time | Maximum 1 second |
Auto Restart | 60 minutes |
Vent Damper | Optional, use Molex 03-06-2061 |
Ambient Temperature | -40°F to + 176°F (-40°C to +80°C) |
Humidity Range | Up to 95% relative humidity non-condensing |