Robertshaw 780-845 Universal Intermittent Pilot Lockout Ignition Module

Robertshaw 780-845 Universal Intermittent Pilot Lockout Ignition Module

Description:

• The Robertshaw® 780 Series Pilot Controls feature flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. 

• When the thermostat calls for heat, the 780 series control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. 

• Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. 

• Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. 

• Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established.

• The Robertshaw 780-845 lockout ignition control provides 90 seconds of spark, followed by a six minute time delay (purge) between ignition attempts. 

• If the pilot flame is not sensed after three tries, the control goes into a one-hour lockout period. 

• At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition.

General Features:

• Reduces truck stock inventory, saving space and money

• Easy-to-install with complete in-depth installation instructions

• Pilot and main valves draw 1 Amp at 0.5 power factor

• Combined load at 1.5 Amps at 0.4 power factor

• 95% relative humidity non condensing at 104°F

Specifications:

Dimensions:

Product Height (in.): 3”

Product Width (in.): 1.5”

Product Depth (in.): 4.75”

Unit Weight: 0.9 lbs.