-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Rheem RHMV6021SEACJA 5 Ton Multi-Position Air Handler, R-410A
$2,459.62
Category:Air Handlers
Manufacturer:Rheem
Product code:RHMV6021SEACJA
Available
Delivery Information
Shipping available
Pick your shipping method at checkout.

Rheem RHMV6021SEACJA 5 Ton Multi-Position Air Handler, R-410A
$2,459.62
General specs
- Product codeRHMV6021SEACJA
- ManufacturerRheem
- SKU
Dimensions
- Dimensions (L x W x H)21.69in x 21.00in x 57.00in
- Weight141.00 lb
Technical Specifications
- Nominal Tons 5 Ton
- Refrigerant R-410A
Rheem RHMV6021SEACJA 5 Ton 2 Stage Multi-Position Air Handler, R-410A
Features
- The RHMV is EcoNet Enabled: This allows the RHMV to directly communicate with the EcoNet Smart Home System.
- The RHMV features an Electronic Expansion Valve (EEV)
- Features a constant CFM variable speed motor (ECM) which provides enhanced SEER performance. The RHMV is rated with RA17, RA20 air conditioners and RP17, RP20 heat pumps
- Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
- Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
- Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
- Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
- Enhanced airflow up to .7" external static pressure.
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
- Coils have copper sweat refrigerant connections
- Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
- Supply duct flanges provided as standard on air handler cabinet.
- Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet.
- Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit.
- Front refrigerant and drain connections.
Specifications
- Tonnage 5
- Stages of Operation Modulating
- Refrigerant Type R410A
- Coil Efficiency Standard
- Metering Device EEV
- Communication EcoNet Enabled
- Voltage Data (Volts-Phase-Hz) 208/240/1/60
- Configuration 4-way Convertible
- Supply Opening (Inches) 19.5W X 10.26D
- Return Opening (Inches) 19.3W X 19.75D
- Refrigerant Connections Sweat (In.) 3/8 Liquid 7/8 Vapor
- Motor Type/HP 3/4 VS-CT (ECM)
- Motor RPM Variable
- Motor # of Speeds Variable
- Blower Wheel 10x10
- CFM Rating 800-1600 CFM
- Application Air Handler Modulating