Reznor X-300 Gas Fired Duct Furnace - Gravity Vented - NG - 409 Stainless Steel Heat Exchanger - 300,000 BTU

Reznor X-300 300,000 BTU Gas Fired Duct Furnace - Gravity Vented - NG - 409 Stainless Steel Heat Exchanger

Description:

• Reznor X Series Duct Furnaces are designed to provide 80% thermal efficiency for indoor application with gravity venting.
• They are certified for use with natural or propane gas, as specified, in sizes from 75,000 through 400,000 BTUH input.
• These models are used as heating components in heating, heating/cooling, or makeup air systems and require a separate blower system for air delivery.
• The furnace has a Reznor Thermocore® aluminized steel heat exchanger with venturi-design tubes.
• The die-formed burners are of aluminized steel and include flared ports with a stainless steel insert.
• The Model X furnace is approved for a temperature rise of 50°F to 90°F and includes “finger-baffles” for proper air distribution at these lower air volumes.
• Removing the finger-baffles increases the air flow.
• These field converted units are approved for a temperature rise of 20°F to 75°F.
• Standard features include a spark ignition pilot and a single-stage, 24-volt gas valve.
• Model X units are wired for field connection to a remote 24-volt thermostat for automatic operation.
• Each unit is provided with all required limit and safety controls, including a blocked vent shut-off system.

General Features:

• Orifices for natural gas
• Aluminized steel heat exchanger
• Aluminized steel burners with stainless steel insert
• 120-volt supply voltage
• 24 volt control voltage transformer
• High limit safety cutout
• Single-stage combination gas valve (see note 1)
• Side access for burners and controls (left side facing air stream)
• Horizontal or vertical flue discharge
• Spark-ignited pilot
• Fan control
• Terminal blocks for connecting field wiring
• Blocked vent shut-off system