-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Renewaire EV PREMIUM X-H Energy Recovery Ventilator 100-390 CFM
$2,732.70
Product code:EV PREMIUM X-H
Product available

Renewaire EV PREMIUM X-H Energy Recovery Ventilator 100-390 CFM
$2,732.70
General specs
- Product codeEV PREMIUM X-H
- ManufacturerRenewaire
- SKUEV PREMIUM X-H
Dimensions
- Dimensions24.38in x 23.63in x 27.25in
- Weight100.00 lb
Technical Specifications
- Airflow 100-390 CFM
- Application Indoor
- Filter Type EV Series
Renewaire EV PREMIUM X-H Energy Recovery Ventilator 100-390 CFM
Description:
- RenewAire is a pioneer in enhancing IAQ while maximizing sustainability through enthalpic-core, static-plate Energy Recovery Ventilators (ERVs) that optimize energy efficiency, lower costs by reducing HVAC loads and therefore reduce environmental footprints.
- Our ERV technology preconditions incoming air with the otherwise-wasted energy (heat and humidity) of the exhaust air going out—all while the airstreams are kept physically separate as certified by the Air Conditioning, Heating and Refrigeration Institute (AHRI) for low-to-zero Exhaust Air Transfer Ratio (EATR) at typical static pressure differentials.
- As the pioneer of static-plate core technology in North America, RenewAire is the largest ERV producer in the USA.
- As buildings become more airtight due to better construction methodologies, the need for increased and balanced ventilation is critical.
- Without it, internally generated contaminants accumulate and cause deficient
- indoor air quality (IAQ), which leads to significant health and cognitive problems for occupants.
- Industry standards are changing to combat deficient IAQ, and codes that adopt these new standards are driving the application of Energy Recovery in ventilation strategies.
General Features:
- White painted cabinet
- Line-cord power supply
- Low-voltage circuit for controls
- Unit may be mounted in any orientation
- Cross-core differential pressure ports
- Dial-A-Flow – balance and airflow adjustment
- Variable speed
- Boost mode
Specifications:
- Application Type: Indoor
- Ventilation Type: Static plate, heat and humidity transfer
- Hardwire Model
- OA Filter(s):Total Qty: 1, Merv 8: spun polyester media, 10 1/2″ x 21 3/4″ x 1″
- RA Filter(s):Total Qty: 1, Merv 8: spun polyester media, 10 1/2″ x 21 3/4″ x 1″
- Core Exchanger material is cellulosic-based and does not contain or use halogenated flame retardants or PVC’s.
- Certified by the Air Conditioning, Heating and Refrigeration Institute (AHRI) for an industry leading low-to-zero Exhaust Air Transfer Ratio (EATR) atypical static pressure differentials