-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
PDM F100.GUS145012B Black Coil 1/4 Insul. 1/2 L 50' Gelcopper PDM14B PDM14B50

PDM F100.GUS145012B Black Coil 1/4 Insul. 1/2 L 50' Gelcopper PDM14B PDM14B50
$138.12
General specs
- Product codeF100.GUS145012B
- ManufacturerPDM
- SKUF100.GUS145012B
Dimensions
- Dimensions30.00in x 30.00in x 5.00in
- Weight15.00 lb
Technical Specifications
- Brand PDM
- Length 50'
- Liquid Line 1/4
- Material Copper/Polythylene
- Suction Line 1/4
PDM F100.GUS145012B Black Coil 1/4 Insul. 1/2 L 50' Gelcopper PDM14B PDM14B50
Features
- Outer Jacket: additional white polyethylene jacket cover protects foam insulation from tearing during installation process
- Foot Marking: insulation incrementally marked by every foot to ensure accurate initial unit charge and reduce copper waste.
- R410: Gelcopper can be used in applications where high-pressure gases are used as refrigeration source
- Anti UV: This product is 100% Anti UV and successfully tested against any related degradation, discoloration or deterioration for a minimum of 3 years
- Paintable: the insulation can be painted to match the surroundings
- Infinitek-ready: product can be ordered with Infinitek technology for the ultimate in copper durability. Please refer to pages 3-4 for additional information about Infinitek.
Specifications
- Polyethylene closed cell: foam assures thermal insulation from surroundings
- ASTM C 1427-07 compliant
- Type I (tubular)
- Grade I (insulation material for use on typical commercial system non-crosslinked)
- Low-density polyethylene foam: closed cells foam, CFC and HCFC gas free
- Water vapor permeability: ASTM E96-00 compliant
- Working temperature: ASTM C 1427-07 compliant
- Wall thickness: 1/2", 3/4” and 1”
- Surface burning characteristics: UL 94, top rated – UL 723,
- ASTM E84 (25/50) compliant, flame and Spread Index less than
- 25 and Smoke Development Index less than 50 as tested according to UL 723
- R-Value: between 9.0 and 4.0 (depending on pipe diameter and insulation thickness)
- COPPER
- Pipes: Manufactured according to ASTM B280
- Copper: No. C122200 DHP (phosphorous deoxidized, high residual phosphorous), 99.90%