-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Carrier DHMAHBQ12XA3 1 Ton High Wall Ductless Indoor Unit, R-410A
$807.04
Product code:DHMAHBQ12XA3
Product available

Carrier DHMAHBQ12XA3 1 Ton High Wall Ductless Indoor Unit, R-410A
$807.04
General specs
- Product codeDHMAHBQ12XA3
- ManufacturerCarrier
- SKUDHMAHBQ12XA3
Dimensions
- Dimensions8.86in x 31.30in x 11.61in
- Weight100.00 lb
Technical Specifications
- Connection Size 5/8"
- Cooling Capacity 12,000 Btu
- EER 14
- Heating Capacity 7,500-12,000 Btu
- Height 11.61"
- Length 8.86"
- Liquid Line 1/4"
- Motor HP 27/1000 HP
- Motor Type ECM (Electronically Commutated Motor)
- Mounting Wall-Mount
- Refrigerant R-410A
- RPM 1,050
- SEER 25.5
- Sound Level 30-47 dBA
- Speeds 4 (Four)
- Suction Line 1/2"
- Voltage 208-230/1/60
- Watts 24.6
- Weight 22.93 lb
- Width 31.3"
Carrier DHMAHBQ12XA3 1 Ton High Wall Ductless Indoor Unit, R-410A
Description:
- The DHMAHB series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
- The fan coil is mounted on the wall, near the ceiling.
- This selection of fan coils permits creative solutions to design problems such as:
- Add-ons to current space (an office or family room addition)
- Special space requirements.
- When changes in the load cannot be handled by the existing system.
- When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork.
- Historical renovations or any application where preserving the look of the original structure is essential.
- The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.
- These compact indoor fan coil units take up very little space in the room and do not obstruct windows.
- The fan coils are attractively styled to blend with most room decors.
General Features:
- Modes: Cool, Heat, Dry, Fan, Auto
- Turbo Mode
- Four fan speeds
- Sleep Mode
- Relative Humidity Sensor
- Intelligent Eye (Occupancy Sensor)
- ECO Mode
- Up-Down Louver control (fixed or swing)
- Follow Me (senses temperature at handheld remote)
- Heating Setback (46° F Heating Mode)
- Quiet indoor operation
- Aluminum Golden Hydrophilic pre-coated fins
- CONTROLS: Wireless Remote Controller included with indoor unit