-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Mr. Cool DIY-18-HP-WMAH-230B 18,000 BTU 1 1/2 Ton Ductless Mini-Split Wall Mounted Air Handler
Mr. Cool DIY-18-HP-WMAH-230C25 E Star DIY 4th Gen 18k BTU Ductless Mini-Split Air Handler (AIR HANDLER ONLY)
Mr. Cool DIY-18-HP-WMAH-230B 18,000 BTU 1 1/2 Ton Ductless Mini-Split Wall Mounted Air Handler
General specs
- Product codeDIY-18-HP-WMAH-230B
- ManufacturerMr. Cool
- SKUDIY-18-HP-WMAH-230B
Dimensions
- Dimensions8.90in x 42.52in x 13.19in
- Weight54.00lb
Mr.Cool DIY 18,000 BTU 1 1/2 Ton Ductless Mini-Split Wall Mounted Air Handler - 230V/60Hz
Choose the DIY 18k BTU 1 ½ Ton Ductless Mini-Split Wall Mounted Air Handler for the most rewarding home improvement project that you can do essentially all by yourself. This unit can cover around 750 square feet, making it perfect for cooling a room in your home to your exact specifications or for additional heating and cooling power in a multi-zone setup. It’s easy to install, too! Choose the best location to mount it, then connect it to the condenser using the DIY’s pre-charged line sets.
You’ll save money before the system is even up and running! After you get this unit installed, there’s a lot of rest and relaxation headed your way thanks to modes like AUTO, DRYING, SLEEP, and many others. This air handler comes with a Smart HVAC Controller, which allows you to link the air handler to your phone so you can enjoy better control and a wider variety of features.
You can rest easy knowing that this unit is covered by a 5 year parts warranty when you register your product online. This DIY 18k BTU 1 ½ Ton Ductless Mini-Split Wall-Mounted Air Handler will treat you to flawless indoor comfort for years to come.
Features:
Tracks air temperature around you, keeping you comfortable at all times.
Alarm will sound when low coolant is detected, preventing damage to the compressor.
Makes this system ideal for greenhouses, server rooms, and other applications that need cooling all year.
Has units running quickly after a power outage.
Saves you money and provides you with 24-hour comfort.
Moves to the same position it was last time the unit was turned on.
Specifications:
Model | DIY-18-HP-WMAH-230B |
UPC | 810512033478 |
Air Flow Direction | Horizontal |
Configuration | Wall Mounted |
Blower Motor | Variable Speed |
Cooling Capacity | 1.5 Ton |
Electrical Phase | 1-Phase |
Line Set Connection Type | Quick Connect |
Liquid Line Size | 1/4 inch |
Max Overcurrent Protection | 20 amps |
Product Height (in) | 13.19 |
Product Length (in) | 8.9 |
Product Width (in) | 42.52 |
Series | DIY |
Suction Line Size | 1/2 inch |
System Application Type | Ductless Split Systems |
Voltage | 240 |
Warranty | 5 Year Parts, 7 Year Compressor |
Weight (lbs) | 54.0100 |
California Residents | see Prop 65 WARNING |
Base Warranty: 5 years parts