-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Mr. Cool CENTRAL-36-HP-MUAH230A00 36K BTU Hyper Heat Central Ducted Air Handler
Mr. Cool CENTRAL-36-HP-MUAH230A00 36K BTU Hyper Heat Central Ducted Air Handler
General specs
- Product codeCENTRAL-36-HP-MUAH230A00
- ManufacturerMr. Cool
- SKUCENTRAL-36-HP-MUAH230A00
Dimensions
- Dimensions21.02in x 21.02in x 49.02in
- Weight129.63lb
Mr. Cool CENTRAL-36-HP-MUAH230A00 36K BTU Hyper Heat Central Ducted Air Handler
Description:
The 36K MRCOOL® Hyper Heat Central Ducted Air Handler is a fantastic choice for addressing your home's heating and cooling demands, regardless of external weather conditions. Additionally, its efficiency leads to utility cost savings.
It features an impressive SEER2 rating of up to 16 and an HSPF2-4 rating of up to 9.5, thanks to its enhanced heating capacity.
Built with painted galvanized steel, the unit's side-discharge design, slide-out blower, self-diagnostics panel, and removable filters make maintenance simple.
Effortless installation is possible by an HVAC technician, as the unit is compatible with the optional MRCOOL® No-Vac® Quick Connect® Line Set.
Pre-charged with environmentally friendly R410-A refrigerant, this line set removes the need for vacuuming or flare welding and is kink-resistant.
It also provides versatile installation possibilities due to its adaptability to various configurations.
If required, an optional heat kit can be acquired separately.
The unit also includes a wired thermostat and wireless remote.
In the unlikely event of any operational concerns, the air handler is backed by a reassuring 10-year warranty for parts and labor, offering you peace of mind. Furthermore, registration is not required for the included labor warranty.
Specifications:
Phase | 1 |
Cooling Capacity | 36,000 Btu |
Heating Capacity | 40,000 Btu |
CFM | 1188.24/1082.35/970.59/864.71 |
Voltage | 208/230 |
Refrigerant Type | R410A |
Max Fuse Breaker | 15 |
Min Circuit Ampacity | 5 |
Inverter | DC |
Max Lineset Length | 213.25 ft |
Liquid Line Size | 3/8in |
Suction Line Size | 3/4in |
Dimensions:
Product Height (in.): 49.02”
Product Width (in.): 21.02”
Product Depth (in.): 21.02”
Unit Weight: 129.63 lbs.