-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Mitsubishi SUZ-KA24NAHZ-R1 2 Ton Universal Hyper-heating Heat Pump, 16.7 SEER2
Mitsubishi SUZ-KA24NAHZ-R1 2 Ton Universal Hyper-heating Heat Pump, 16.7 SEER2
General specs
- Product codeSUZ-KA24NAHZ-R1
- ManufacturerMitsubishi
- SKUSUZ-KA24NAHZ-R1
Dimensions
- Dimensions13.00in x 37.41in x 37.13in
- Weight190.00lb
Mitsubishi SUZ-KA24NAHZ-R1 2 Ton Universal Hyper-heating Heat Pump, 16.7 SEER2
General Features:
The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
INVERTER-driven compressor and LEV provide high efficiency and comfort while using only the energy needed to maintain maximum performance
Hyper-heating performance offers 100% heating capacity at 5° F
Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
Quiet operation
Built-in base pan heater
Innovative Joint Lap DC Motor leads to high efficiency and reliability
Pulse Amplitude Modulation technology
Specifications:
Cooling Capacity | 24,000 Btu/h |
Heating Capacity | 28,000 Btu/h |
SEER2 | 16.7 |
EER2 | 11.7 |
HSPF2 | 9.4 |
COP at 47°F | 3.7 |
Voltage, Phase, Frequency | 208/230, 1, 60 |
MCA | 17.0 A |
Fan Motor Output | 27 A |
Airflow Rate [Cooling / Heating] | 1940 / 1940 CFM |
Sound Pressure Level, Cooling | 52 dB(A |
Sound Pressure Level, Heating | 53 dB(A |
Compressor Type | Scroll |
Compressor Rated Load Amps | 9 A |
Compressor Locked Rotor Amps | 18.0 A |
Dimensions:
Product Height (in.): 37.125"
Product Width (in.): 37.406"
Product Depth (in.): 13”
Unit Weight: 190 lbs.