-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Mitsubishi PUZ-HA36NKA 3-Ton 36,000 Btu/h Hyper-Heating Heat Pump Universal Outdoor
Mitsubishi PUZ-HA36NKA 3-Ton 36,000 Btu/h Hyper-Heating Heat Pump Universal Outdoor
General specs
- Product codePUZ-HA36NKA
- ManufacturerMitsubishi
- SKUPUZ-HA36NKA
Dimensions
- Dimensions14.19in x 41.31in x 52.69in
- Weight261.00lb
Mitsubishi PUZ-HA36NKA 3-Ton 36,000 Btu/h Hyper-Heating Heat Pump Universal Outdoor
General Features:
Variable speed INVERTER-driven compressor
High heating capacity: flash injection circuit maintains 100% heating capacity at 5°F outdoor temperature
Wide heating range: heating performance down to -13°F (average of 80% heating capacity)
High speed heating at start up: Hyper-Heating INVERTER® reduces the time for heating at start up by about half compared to standard models
Suction accumulator pre-charged with refrigerant volume for piping length up to 100 ft.
High pressure/temperature protection
Built-in base pan heater
Flash injection circuit provides efficient high heating capacities at low ambient temperatures
Specifications:
Dimensions:
Product Height (in.): 52.6875”
Product Width (in.): 41.3125”
Product Depth (in.): 14.1875”
Unit Weight: 261 lbs.