-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mitsubishi MUZ-GS09NAHZ-U1 0.75 Ton Hyper Heat Pump Outdoor Unit
$1,549.85
Product code:MUZ-GS09NAHZ-U1
Product available
Mitsubishi MUZ-GS09NAHZ-U1 0.75 Ton Hyper Heat Pump Outdoor Unit
$1,549.85
General specs
- Product codeMUZ-GS09NAHZ-U1
- ManufacturerMitsubishi
- SKUMUZ-GS09NAHZ-U1
Dimensions
- Dimensions11.25in x 31.50in x 21.63in
- Weight81.00 lb
Technical Specifications
- Compressor RLA 6.7
- Cooling Capacity 12,200
- EER2 15.4
- Heating Capacity 15,900
- Liquid Line 1/4"
- Nominal CFM 584-1,152
- Nominal Tons 0.75 Ton
- Refrigerant R-410A
- SEER2 28.4
- Suction Line 3/8”
- Unit Type Outdoor
- Voltage 208-230V/60Hz/1PH
Mitsubishi MUZ-GS09NAHZ-U1 0.75 Ton Hyper Heat Pump Outdoor Unit
General Features:
- INVERTER-driven compressor and LEV provide high efficiency and comfort while using only the energy needed to maintain maximum performance
- Hyper-heating performance offers 100% heating capacity at 5°F
- Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
- Quiet outdoor unit operation
- Built-in base pan heater
- Innovative DC fan motor leads to high efficiency and reliability
- Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life
- Rated for 2,000 hours spraying time per ASTM B117 Standard