Maytag PGC2TC060DVB1 60,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up-To 95% AFUE, Two Stage
Shipping options
Maytag PGC2TC060DVB1 60,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up-To 95% AFUE, Two Stage
General specs
- Product codePGC2TC060DVB1
- ManufacturerMaytag
- SKUPGC2TC060DVB1
Dimensions
- Dimensions28.00in x 17.50in x 34.50in
- Weight125.00lb
Maytag PGC2TC060DVB1 60,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up-To 95% AFUE, Two Stage, Fixed Speed ECM
Description:
The high efficiency gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet.
The rounded corner jacket provides a pleasing “appliance appearance.”
General Features:
iSEER™ - Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling.
100% fired and tested - All units and each component are tested on the manufacturing line.
Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.
Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.
Tubular primary heat exchanger - Heavy gauge aluminized steel heat exchanger assures a long life.
30 second blower delay at start-up - Assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
30 second post purge - Increases life of heat exchanger.
Hot surface igniter - Innovative application of an appliance type igniter with a 20 year history of reliability.
Utilizes proven SmartStart® technology.
Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
High static blowers - All models equipped with high static blowers.
90 second cooling cycle blower-off delay (TDR) - Increases cooling performance when matched with a Nortek Global HVAC coil.
Flexible category I venting system - May be vented with dedicated venting system or common vented with other category one appliances.
Variable Speed Blower Kit -Upgradable to full variable speed with kit.
LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.
Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
Integrated control board - Incorporates connections for electronic air cleaner and humidifier.
Two piece door design - Enhances furnace appearance and uses captured screws to prevent loosing door screws.
Blower Compartment: Insulated for ultra quiet operation.
Sealed Vestibule reduces burner and inducer sound levels
2 Stage Inducer - Optimizes efficiency on first stage heat and reduces sound levels.
Furnace Air Leakage - These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%.
Keep the conditioned air flowing to where it’s needed.
Specifications:
Dimensions:
Product Height (in.): 34.5”
Product Width (in.): 17.50”
Product Depth (in.): 28”
Shipping Weight: 125 lbs.