Maytag MGC2SC-120D-T45D1 120,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up To 92% AFUE, Single Stage
Shipping options
Maytag MGC2SC-120D-T45D1 120,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up To 92% AFUE, Single Stage
General specs
- Product codeMGC2SC-120D-T45D1
- ManufacturerMaytag
- SKUMGC2SC-120D-T45D1
Dimensions
- Dimensions28.00in x 24.50in x 34.50in
- Weight155.00lb
Maytag MGC2SC-120D-T45D1 120,000 Btu/h High Efficiency Upflow/Horizontal Gas Furnace Up To 92% AFUE, Single Stage
Description:
The high efficiency gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet.
The rounded corner jacket provides a pleasing “appliance appearance.”
General Features:
All units and each component are tested on the manufacturing line.
Unique corner post design assures products will arrive to the homeowner dent free.
Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.
Heavy gauge aluminized steel heat exchanger assures a long life.
30 second blower delay at start-up - Assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
30 second post purge - Increases life of heat exchanger.
Hot surface igniter - Innovative application of an appliance type igniter with a 20 year history of reliability.
Utilizes proven SmartStart® technology.
Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
All models equipped with high static blowers.
90 second cooling cycle blower-off delay (TDR) - increases cooling performance when matched with a Nortek Global HVAC coil.
Flexible category I venting system - May be vented with dedicated venting system or common vented with other category one appliances.
High efficiency blower kits - Maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized.
Energy-efficient, brushless DC (ECM), Multi-speed direct drive blower - Designed to give a wide range of cooling capacities.
Switches on PCB, provide ultra easy motor speed selection.
LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.
Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
Integrated control board - Incorporates connections for electronic air cleaner and humidifier. Ergonomically located for ease of service.
Two piece door design - Enhances furnace appearance and uses captured screws to prevent loosing door screws.
Blower Compartment - Insulated for ultra quiet operation.
These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%.
Keep the conditioned air flowing to where it’s needed.
Specifications:
Dimensions:
Product Height (in.): 34.5”
Product Width (in.): 24.50”
Product Depth (in.): 28”
Shipping Weight: 155 lbs.