-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Magic-Pak 24MGE8-12-241NP 24k Btu Gas Heating 2 Ton Electric Cooling
Magic-Pak 24MGE8-12-241NP 24k Btu Gas Heating 2 Ton Electric Cooling
General specs
- Product code24MGE8-12-241NP
- ManufacturerMagic-Pak
- SKU24MGE8-12-241NP
Dimensions
- Dimensions24.38in x 28.00in x 59.88in
- Weight301.00lb
Magic-Pak 24MGE8-12-241NP 24k Btu Gas Heating 2 Ton Electric Cooling
Description:
MagicPak units are designed for use in all multifamily applications, such as: apartments, condominiums, student housing and senior living
Installation in conditioned and unconditioned mechanical spaces
Units are approved for installations up to 5,500 ft. without any modifications or adjustments
For installations above 5,500 ft., refer to High Altitude Application Data table and installation instructions for additional details
General Features:
Fully ducted system
0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton
15,000, 24,000, 36,000, 48,000 and 60,000 BTUH
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE
Individual metering and control for each unit
Easy plug-and-play-like install and service
Top supply and return
Nominal CFM at 0.5” W.C.
<2.0% cabinet air leak
Pre-wired and pre-charged
Factory installed evaporator drain float switch
Direct vent/sealed combustion
Standard stainless steel heat exchanger
5-year limited warranty on all parts
Specifications:
Gas Heating Input | 24,000 BTU/H |
Nominal Cooling Capacity | 24,000 BTU/H |
SEER | 12 |
Rated Load Amps (RLA) | 8.4 |
Locked Rotor Amps (LRA) | 38.0 |
Nominal RPM | 1050 |
Rated HP | 1/3 |
Refrigerant | R410A |
Voltage | 208/230V |
Phase | 1 |
Frequency | 60HZ |
Dimensions:
Product Height (in.): 59.875”
Product Width (in.): 28”
Product Depth (in.): 24.375”
Shipping Weight: 301 lbs.