Magic-Pak 10MHP4-14-361FP 3 Ton Cooling Electric Heat Pump Packaged Unit

Magic-Pak 10MHP4-14-36 3 Ton Cooling Electric Heat Pump Packaged Unit

Description:

• MagicPak units are designed for use in all multifamily applications, such as: apartments, condominiums, student housing and senior living

• Installation in conditioned and unconditioned mechanical spaces

General Features:

• Factory shipped ready for top supply and return duct connections

• Return air may be brought in through the optional front return opening

• If ductwork is attached to the optional front return opening, provisions to service unit filter must be provided

• Filter may need to be relocated to a suitable location outside the cabinet for ease of service

• Ducted or free/non ducted return configuration, which may utilize the top or front as return points

• Front access panel doubles as cover for top return (except 3.0 ton)

• Line voltage knockouts (two concentric) to accommodate field required wire size

• Thermostat connections are located at the top of the cabinet

• Two gauge ports are located within the lower compartment of the unit

• Refer to Unit Dimension figure for additional details

• Embossed galvanized steel cabinet

• Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation

• Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation

• Factory charged with R-410A refrigerant

• Factory sealed and tested

• Refer to Unit Electrical and Physical Data table for additional details

• Copper tube with aluminum fin coils

• Shuts off unit if abnormal operating conditions cause the refrigerant discharge pressure to rise above acceptable levels

• Provides loss of charge protection by shutting off unit if refrigerant liquid pressure falls below acceptable levels

Specifications:

Dimensions:

Product Height (in.): 67.875”

Product Width (in.): 28”

Product Depth (in.): 24.375”

Shipping Weight: 299 lbs.