-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ductless Accessories
- Friedrich Disconnect Switches
- Friedrich Ductless Splits
- Friedrich Power Cords
- Friedrich Replacement Parts
- Friedrich Wall Sleeve
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Linesets
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
ICM Controls ICM495-30A-F 30 Amp Fused Disconnect With Internal Surge Protection
ICM Controls ICM495-30A-F 30 Amp Fused Disconnect With Internal Surge Protection
General specs
- Product codeICM495-30A-F
- ManufacturerICM Controls
- SKUICM495-30A-F
Dimensions
- Dimensions9.00in x 5.25in x 2.50in
- Weight0.00lb
ICM Controls ICM495-30A-F 30 Amp Fused Disconnect with Internal Surge Protection
Description:
The ICM495 is a UL Listed Electrical Disconnect with an Internal Surge Protective Device built-in.
The ICM495 is available in two models 30A Fused and 60A Non Fused.
The included field replaceable Type 2 SPD is intended for 240 VAC Split Phase configurations.
When a surge occurs, the ICM495 will absorb the surge up to the limits expressed in the specifications section in this guide.
The ICM495 incorporates thermal protection on the surge elements (TMOV’s) which allows for safe disabling of the surge elements when a surge exceeds the thermal limits of the device.
The ICM495 has a status light on the control which identifies operational status when illuminated.
The ICM495 can be installed as a Type 2 device for both indoor and outdoor applications.
Suitable for use on a circuit capable of delivering not more than 10kA RMS symmetrical amperes, 240V maximum.
General Features:
UL Listed Electrical Disconnect including both enclosure & surge protector
120VAC single-phase, 240VAC split-phase
Features an internal field replaceable surge protective device (SPD)
Maximum Surge Current Rating of 100kA
Highest UL rating for nominal discharge current (In 20kA), for increased longevity & durability of the SPD
Constructed with 2 high-quality thermally protected MOV’s (TFMOV)
Completely factory wired for quick and easy installation
NEMA type 3R rated powder coated metal enclosure for indoor/outdoor use
Fully accessible mounting holes, no dissembling required
Braided strap thoroughly grounding both the enclosure and cover
LED indicator light showing when Surge Protection is operational
30A Fused & 60A non-fused models available
Made in the USA
Specifications:
Input | |
Voltage | Split phase 240 VAC |
Frequency | 50/60Hz |
Contact Ratings | |
Voltage | 240 VAC |
FLA | 30A/60A (depending on model) |
LRA | 360A |
Mechanical | |
Mounting | Four mounting holes in back of enclosure |
Diagnostics | Green LED indicates surge protection present |
Enclosure | NEMA Type 3R metal enclosure for outdoor and indoor installation |
Parameters | |
Short Circuit Current Rating (SCCR) | 10kA |
Nominal discharge current (In) | 20kA |
Protection mode | L1-L2, L1-N, L2-N |
Maximum Continuous Operation Voltage (MCOV): | |
L-L | 300 VAC |
L-N | 150 VAC |
VPR: | |
L-L | 1200 VAC |
L-N | 700 VAC |
SPD type | Type 2 |
Surge protection technology | TFMOV |
Replaces:
All standard disconnect boxes rated for equal voltage and current configurations
MARS | 83916 |
RectorSeal | RSH-50 96417 |
Dimensions:
Product Height (in.): 2.50”
Product Width (in.): 5.25”
Product Length (in.): 9”