-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
ICM Controls ICM492D Single Phase Voltage Monitor

ICM Controls ICM492D Single Phase Voltage Monitor
General specs
- Product codeICM492D
- ManufacturerICM Controls
- SKUICM492D
Dimensions
- Dimensions (L x W x H)3.00in x 3.20in x 1.35in
- Weight5.00 lb
ICM Controls ICM492D Single Phase Voltage Monitor
Description:
The ICM492D constantly monitors line voltage and protects single-phase equipment against low and high voltage conditions, and rapid short cycling due to voltage fault or power interruption.
Its easy-view, backlit digital display makes it user friendly to read and monitor voltage conditions, and adjust parameters to meet specific needs.
General Features:
Backlit digital display – Easier to read in low light
Stronger buttons – Redesigned for better durability
Improved microprocessor – More accurate operation
Voltage calibration feature – Matches voltage readings with a voltmeter for precision
Specifications:
User Adjustable Settings | |
Voltage setpoint | 95-280 VAC |
Anti-short cycle time delay | 0-720 seconds |
Over voltage setting | 5-25% |
Under voltage setting | 5-25% |
Control mode | On and Off |
Response time | 0.1 to 10 seconds |
Inputs | |
Voltage | 80 to 300 VAC |
Frequency | 50/60 Hz |
Accuracy | ±2% |
Low Power Consumption | max 50 mA @ 120V, max 100 mA @ 240V |
Control Voltage | 18 to 240 VAC |
Output | |
Type | Dry relay contacts |
Form | SPDT |
Relay Contact Ratings | |
N.C. Contacts | 10A resistive @ 277 VAC |
N.O. Contacts | 10A resistive @ 277 VAC |
Connection Terminals | |
0.25” male fast-on | |
Environmental | |
Operating temperature range | -40°C to +70°C |
Storage temperature range | -40°C to +85°C |
Maximum Operating/Storage Relative Humidity | 95% non-condensing |
Replaces:
Wagner / DiversiTech | DSP-1 | |
ICM | ||
ICM491C-LF | AF7103 | AG7106 |
AH7103 | AH7106 | AK7101 |
AL7101 | ICM491 | ICM491C |
ICM491-LF |
Dimensions:
Product Height (in.): 1.35”
Product Width (in.): 3.2”
Product Length (in.): 3”
Unit Weight: 0.4 lbs.