Live chat
Support1-215-316-5893(Guest ID: 8202268)

ICM Controls ICM2913 Direct Spark Ignition (DSI) Control Board (Trane D674711P01)

$124.84
Category:ICM Controls
Manufacturer:ICM Controls
SKU:ICM2913
Product code:ICM2913
Product available
ICM Controls ICM2913 Direct Spark Ignition (DSI) Control Board (Trane D674711P01)
$124.84

General specs

  • Product codeICM2913
  • ManufacturerICM Controls
  • SKUICM2913

Dimensions

  • Dimensions5.50in x 4.75in x 1.50in
  • Weight0.38lb
  • Specification Sheet
  • Installation Manual

ICM Controls ICM2913 Direct Spark Ignition (DSI) Control Board (Trane D674711P01)


Description:


  • The ICM2913 is a form, fit, and functional replacement for the Trane Spark Ignition Control: D674711P01 shown in the cross-reference section of the guide.

  • The control boards are designed as automated gas ignition controls that monitor the ignition sequence including the inducer, pressure switch, spark ignition, gas valve, flame sense, and circulating blower while maintaining full safety circuit monitoring including the high limit switch, roll out switch and auxiliary limit switch circuits.


General Features:


  • Controls blower motors, gas valve, & spark ignitor in sequence

  • Protects against short cycling

  • Selectable Heat/Cool blower off-delay time

  • Flash codes from the onboard LED indicate specific problems for easier troubleshooting

  • Repeated ignition failures or flame losses will disable heat operation for safety


Specifications:


Line voltage

230 VAC

Line frequency

50/60 Hz

Control voltage

18-30 VAC

Circulator blower

10 FLA, 30 LRA @ 240 VAC

Inducer blower

0.7 FLA, 1.5 LRA @ 240 VAC

Combined gas valve load

1.5 A @ 24 VAC

Minimum flame signal threshold

0.75 uA


Replaces: 


Trane Spark Ignition Control

D674711P01


Dimensions:


Product Height (in.): 1.5”

Product Width (in.): 4.75”

Product Depth (in.): 5.5”

Unit Weight: 0.38 lbs.



Top