-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
ICM Controls ICM2909 Direct Spark Ignition (DSI) Control Board
ICM Controls ICM2909 Direct Spark Ignition (DSI) Control Board
General specs
- Product codeICM2909
- ManufacturerICM Controls
- SKUICM2909
Dimensions
- Dimensions5.75in x 6.60in x 2.25in
- Weight0.00 lb
ICM Controls ICM2909 Direct Spark Ignition (DSI) Control Board
Description:
The ICM2909 has incorporated LED diagnostics to assist in troubleshooting.
Fault code information can be found in the application guide.
General Features:
Direct Spark Ignition (DSI) control board
Microprocessor-based
Monitors timing, trial for ignition, system switches, flame sensing and lockout
100% lockout safety feature
Compatible with LP or Natural Gas
LED indication for status and fault codes to aid in troubleshooting
Specifications:
Inputs | |
Line voltage | 208-230 VAC, 50/60 Hz |
Control voltage | 18-30 VAC, 50/60 Hz |
System switches | Vent pressure, limit and MRLC (Manual Reset Limit Control) |
Outputs | |
Heat N.C. | 16FLA/30 LRA @ 277 VAC, 30K @ 85°C |
Cool N.O. | 15FLA/36 LRA @ 277 VAC, 100K @ 85°C |
Inducer | 9.8FLA/58.8LRA, 1/2HP @ 120 VAC, 6K @ 75°C |
Gas valve | 2.3 A PILOT DUTY @ 240 VAC, 6K @ 75°C |
Heat Operation Timing | |
Pre-purge | 3 seconds |
Heat blower ON delay | 30 seconds |
Post-purge | 5 seconds |
Heat blower OFF delay | 90 seconds |
Ignition trial | 7 seconds |
Inter-purge (retrial) | 15 seconds |
Ignition activation period | 5 seconds |
Flame establishing period | 2 seconds |
Flame failure response time | 0.8 seconds (maximum) |
Cooling Operation | |
Cool blower On delay | 1 second |
Cool blower Off delay | 30 seconds |
Lockout Timing | |
Auto reset lockout | 60 minutes |
Environmental | |
Operating temperature | -40˚F to 175˚F (-40˚C to 80˚C) |
Storage temperature | -40˚F to 185˚F (-40˚C to 85˚C) |
Humidity | 5% – 95% R.H. (non-condensing) at +55˚C |
Replaces:
Rheem | ||
62-23599-01 | 62-23599-02 | 62-23599-03 |
62-23599-04 | 62-23599-05 |
Dimensions:
Product Height (in.): 2.25”
Product Width (in.): 6.60”
Product Depth (in.): 5.75”