-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
ICM Controls ICM2904 Intermittent Pilot Gas Ignition Control Module
ICM Controls ICM2904 Intermittent Pilot Gas Ignition Control Module
General specs
- Product codeICM2904
- ManufacturerICM Controls
- SKUICM2904
Dimensions
- Dimensions4.00in x 5.30in x 2.00in
- Weight1.00 lb
ICM Controls ICM2904 Intermittent Pilot Gas Ignition Control Module
Description:
Reznor Replacement.
Continuous Retry for use with intermittent pilot boilers, furnaces and other heating appliances.
General Features:
Intermittent pilot gas ignition control module
For use with intermittent pilot boilers, furnaces and other heating appliances
Microprocessor-based
Remote flame sensing
Compatible with LP or natural gas
Brown out monitoring
Specifications:
Product Type | Intermittent Pilot Gas Ignition |
Control Voltage | 18-30 VAC |
Frequency | 50/60 Hz |
Pilot Valve | 2A @ 24 VAC |
Main Gas Valve | 2A @ 24 VAC |
Current Draw | 100mA maximum |
Pre-Purge Delay | 0 seconds |
Operating Temperature | -40°F to 167°F,-40°C to 75°C |
Humidity | 5%-95% R.H. (non-condensing) at +55°C |
Replaces:
Reznor | 257009 |
UTEC | 1003-638A |
Dimensions:
Product Height (in.): 2”
Product Width (in.): 5.3”
Product Depth (in.): 4”
Unit Weight: 1 lbs.