-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
ICM Controls ICM2810 Furnace Ignition Control Board
![](https://skipthewarehouse.com/image/cache/products/icm-controls-icm2810-furnace-ignition-control-board-764x764.webp)
ICM Controls ICM2810 Furnace Ignition Control Board
General specs
- Product codeICM2810
- ManufacturerICM Controls
- SKUICM2810
Dimensions
- Dimensions4.50in x 6.00in x 1.00in
- Weight0.50 lb
ICM Controls ICM2810 Furnace Ignition Control Board For Goodman PCBBF136 and PCBBF140
Description:
The ICM2810 is a low cost replacement for the Goodman PCBBF136 and PCBBF140 furnace control boards which is used to control gas valve, ignitor, blower motor, inducer, humidifier and air cleaner.
General Features:
Low cost, Goodman replacement board
Microprocessor-based precision
Controls inducer and blower fan motors, hot surface igniter, and gas valve
Monitors timing, trial for ignition, flame sensing, pressure switches, limit switches
Designed for 100% gas shutoff in case of ignition failure
Reverse polarity protection
Compatible with 24 VAC standard thermostat
Twinning compatible with another ICM2810 control board
Compatible with LP or natural gas
Provides diagnostic LED to aid in testing/troubleshooting
Specifications:
Product Type | Control Board |
Operating Temp Range | -40° to 176°F |
Humidity Range | 5% to 95% Relative Humidity (Non-Condensing) |
Voltage Range | Line (98 - 132 VAC) @ 60Hz |
Pre-purge Time | 15 seconds |
Igniter Warm Up Time | 18 seconds |
Post-Purge Time | 15 seconds |
Total Trials for Ignition | 3 (auto rest after 1 hour) |
Heat Blower On | 30 seconds |
Heat Blower Off | Selectable 90/120/150/180 seconds |
Fan (Heat) On/Off Delay | 1 second |
Cool On | 5 seconds |
Cool Off | 45 seconds |
Replaces:
BD1000 | ICM2810C |
Goodman | |
PCBBF136 | PCBBF140 |
Dimensions:
Product Height (in.): 1”
Product Width (in.): 6”
Product Depth (in.): 4.5”
Unit Weight: 0.5 lbs.