-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Goodman MBVK20DP1X00 2000 CFM Variable Speed Modular Blower, R-32
Goodman MBVK20DP1X00 2000 CFM Variable Speed Modular Blower, R-32
General specs
- Product codeMBVK20DP1X00
- ManufacturerGoodman
- SKUMBVK20DP1X00
Dimensions
- Dimensions21.00in x 24.50in x 30.00in
- Weight86.00lb
Goodman MBVK20DP1X00 2000 CFM Variable Speed Modular Blower, R-32
Product Benefits:
Variable-speed ECM blower motor
Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
Advanced configuration of the airflow and tonnage in communicating mode
Provides constant CFM over a wide range of static pressure conditions independent of duct system
CFM indicator
Fault recall of six most recent faults
Provides adjustable low CFM for efficient fan-only operation
Improved humidity and comfort control
Built-in compatibility with multi-stage heat pump and cooling applications
3 kW – 21 kW electric heat kits
UL 60335 2-40 Compliant
AHRI certified; ETL listed
Cabinet Features:
Horizontal or vertical configuration capabilities
21” depth for easier attic access
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Galvanized, leather grain-embossed finish
Cabinet air leakage less than 2% at 1.0 inch H₂0 when tested in accordance with ASHRE standard 193
Cabinet air leakage less than 1.4% at 0.5 inch H₂0 when tested in accordance with ASHRE standard 193
Field Installed 3 kW – 25 kW electric heater kits available
Specifications:
Type | Air Handler |
Product Line | MBVK |
Blower Motor Type | Variable Speed |
Motor Type | ECM |
Mount Type | Multi-Position |
Electric Heat | Available |
TXV Installed | No |
Capacity | 5.0 Tons |
Maximum Air Flow | 2000 CFM |
Voltage | 208/230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Recommended Breaker Size | 15 Amps |
Minimum Circuit Ampacity | 6.5 Amps |
Parts Warranty | 10 Years |
Dimensions:
Unit Depth | 21” |
Unit Height | 30” |
Unit Width | 24.5” |
Unit Weight | 86 lbs |