-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Goodman GPHM36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Multi-Position
Goodman GPHM36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Multi-Position
General specs
- Product codeGPHM36041
- ManufacturerGoodman
- SKUGPHM36041
Dimensions
- Dimensions51.00in x 47.00in x 42.75in
- Weight495.00lb
Goodman GPHM36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Multi-Position
Description:
The Goodman GPHM3 13.4 SEER2 Two-Stage Self-Contained Packaged Heat Pump provides energy-efficient cooling and heating performance in one self-contained unit.
The GPHM3 is housed in a heavy-gauge, galvanized-steel cabinet that offers a high-quality, UV-resistant powder-paint finish and allows for a ground-level or rooftop mount.
These packaged units are entirely self-contained, so the only connections needed for installation are the supply and return ducts, the line and low voltage wiring, and the drain connection.
The units are ETL listed and AHRI certified.
General Features:
Energy-efficient scroll compressor
Multi-speed ECM indoor blower motor
Convertible airflow: horizontal or downflow
Copper tube/aluminum fin condenser coil
All-Aluminum evaporator coil
Electric heat kit available as a field-installed option
AHRI Certified; ETL Listed
Cabinet Features:
Heavy-gauge galvanized-steel cabinet with attractive Architectural Gray powder-paint finish
Aluminum foil-facing internal insulation reinforced with fiberglass scrim
Fully insulated air-handling compartment with convenient access panels
Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
Louvered condenser coil protection
One footprint for all tonnages
When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds
Specifications:
Type | Packaged Heat Pump |
Cooling Capacity | 56500 BtuH |
Heating Capacity | 55500 BtuH |
Airflow Rate High Cooling | 1850 |
Airflow Rate High Heating | 1850 |
Compressor Stages | Two Stage |
Compressor Type | Scroll |
Max. Voltage | 253 |
Min. Circuit | 37.5 |
Min. Voltage | 197 |
Model Efficiency | 13.4 SEER |
Motor Speed Type | Multi Speed ECM |
Frequency | 60 |
Phase | 1 |
Voltage | 208/230 |
Refrigerant | R-410A |
Tonnage | 5 Tons |
Unit Type | Outdoor |
Dimensions:
Product Height (in.): 42.75”
Product Width (in.): 47”
Product Depth (in.): 51”
Shipping Weight: 495 lbs.