-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Goodman GPHH36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Horizontal
Goodman GPHH36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Horizontal
General specs
- Product codeGPHH36041
- ManufacturerGoodman
- SKUGPHH36041
Dimensions
- Dimensions34.00in x 66.00in x 36.00in
- Weight400.00lb
Goodman GPHH36041 5 Ton Single Packaged Heat Pump 13.4 SEER2, Horizontal
Description:
The Goodman GPHH3 Packaged Heat Pump provides energy-efficient cooling and heating performance in one self-contained unit.
This unit uses the environmentally friendly refrigerant R-410A, which is chlorine-free to help prevent damage to the ozone layer.
The GPH14H is housed in a heavy-gauge, galvanized-steel cabinet that offers a high-quality, UV-resistant powder-paint finish and allows for a ground level or rooftop mount.
General Features:
Energy-efficient compressor
ECM indoor blower motor
Quiet horizontal discharge
Copper tube/aluminum fin coil
Totally enclosed, permanently lubricated condenser fan motor
Fully charged system
Electric heat kit available as a field-installed option
AHRI Certified
ETL Listed
Cabinet Features:
Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
Aluminum foil-facing internal insulation reinforced with fiberglass scrim
Fully insulated blower compartment with convenient access panels
Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
Louvered condenser coil protection
One footprint for all tonnages
When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Specifications:
Type | Packaged Heat Pump |
BtuH Cooling | 57,000 |
BtuH Heating Input | 54500 |
Airflow Rate High Cooling | 1700 |
Airflow Rate High Heating | 1700 |
Compressor Stages | Single Stage |
Compressor Type | Scroll |
Max. Voltage | 253 |
Min. Circuit | 39.8 |
Min. Voltage | 197 |
Model Efficiency | 13.4 SEER |
Motor Speed Type | Multi Speed ECM |
Frequency | 60 |
Phase | 1 |
Voltage | 208/230 |
Refrigerant | R-410A |
Tonnage | 5 Tons |
Unit Type | Outdoor |
Dimensions:
Product Height (in.): 36”
Product Width (in.): 66”
Product Depth (in.): 34”
Unit Weight: 400 lbs.