-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Sensors
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Gibson WSH3BE4M1SP30K 2.5T Heat Pump 14.3 SEER2 R410A
$2,238.15
Product code:WSH3BE4M1SP30K
Available

Gibson WSH3BE4M1SP30K 2.5T Heat Pump 14.3 SEER2 R410A
$2,238.15
General specs
- Product codeWSH3BE4M1SP30K
- ManufacturerGibson
- SKUWSH3BE4M1SP30K
Dimensions
- Dimensions (L x W x H)31.75in x 31.75in x 41.25in
- Weight200.00 lb
Technical Specifications
- Liquid Line 3/8"
- Nominal Tons 2.5 Ton
- Refrigerant R410A
- SEER2 14.3
- Suction Line 3/4"
- Voltage 208/230-1-60
Gibson WSH3BE4M1SP30K 2.5T Heat Pump 14.3 SEER2 R410A
General Features:
- Quality Compressor: State-of-the-art Copeland Scrollâ„¢ compressor is standard equipment.
- Designed Using Galvanized Steel: With powder-coated paint and a gloss finish that eliminates sharp edges and reduces scratching.
- Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
- Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads.
- High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
- Liquid Line Filter Drier: Included with unit, field installed.
- One Piece Top/Orifice: Designed for maximum airflow and quiet operation.
- Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.
- Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel.
- Swept Wing Fan Blade: Designed to significantly reduce unwanted noise.
- All-Aluminum Coils: All aluminum coils in all models which provide high corrosion resistance.
- Servicer-Friendly Jacket: Side panels can be easily removed and replaced without removing the top grill.