-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Gibson WSA3BE4M1SN36K 3 Ton 14.3 SEER2 High Efficiency Air Conditioner, Single-Stage
Gibson WSA3BE4M1SN36K 3 Ton 14.3 SEER2 High Efficiency Air Conditioner, Single-Stage
General specs
- Product codeWSA3BE4M1SN36K
- ManufacturerFrigidaire
- SKUWSA3BE4M1SN36K
Dimensions
- Dimensions30.75in x 30.75in x 39.25in
- Weight225.00lb
Gibson WSA3BE4M1SN36K 3 Ton 14.3 SEER2 High Efficiency Air Conditioner, Single-Stage
Description:
The WSA3BE Series of air conditioners offers exceptional performance.
The unit, when combined with our engineered coils or air handlers, offers a full line of quality, split system cooling equipment.
General Features:
State-of-the-art Copeland Scroll™ compressor is standard equipment.
These brass valves are easily accessible and simplify servicing of the refrigeration system.
Designed Using Galvanized Steel - With powder-coated paint with a gloss finish that eliminates sharp edges and reduces scratching.
It passes 950 hours of salt spray per ASTM Std. B117.
Permanently Lubricated Motor - A heavy duty PSC motor for long lasting reliability and quiet operation.
Requires no maintenance and is completely protected from rain and snow.
Removable Top Grille Assembly - Allows ease of service from the top without disconnecting fan motor leads.
Protects against abnormally high system pressures.
Auto-reset feature prevents nuisance service visits.
Liquid Line Filter Drier - Included with unit, field installed.
One Piece Top/Orifice - Designed for maximum airflow and quiet operation.
Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.
Composite Base Pan - Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel.
All aluminum coils in all models which provides high corrosion resistance.
Powder Coated Wire Guard and Mesh Hail Guard - Will never rust and protects the coil from being damaged by balls, lawnmowers, hail, etc.
Specifications:
Cooling Capacity | 34,800 Btu/h |
SEER2 | 14.3 |
EER2 | 11.7 |
CFM | 1,195 |
Volts-Cycles-Phase | 208/230-60-1 |
Stages | Single-Stage |
Delay Fuse Max. | 30 |
Min. Circuit Ampacity | 18.6 |
Fan Motor | 1/5 HP |
Compressor LRA | 87.4 |
Refrigerant | R-410A |
Suction Line O.D. | 3/4" |
Liquid line O.D. | 3/8" |
Sound Rating | 71 dB |
Dimensions:
Product Height (in.): 39.25 ”
Product Width (in.): 30.75”
Product Depth (in.): 30.75”
Shipping Weight: 225 lbs.