Gibson KG7SA-072C-T24B1 72,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM

Gibson KG7SA-072C-T24B1 72,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM

Description:

• The gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. 

• The rounded corner jacket provides a pleasing “appliance appearance.”

General Features:

• 100% fired and tested - All units and each component are tested on the manufacturing line.

• Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.

• Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.

• Tubular primary heat exchanger - Heavy gauge aluminized steel heat exchanger assures a long life.

• 30 second blower delay at start-up - Assures a warm duct temperature at furnace start-up. 

• Adjustable blower off settings (60, 90, 120 and 180 seconds).

• 30 second post purge - Increases life of heat exchanger.

• Hot surface ignitor - Innovative application of an appliance type ignitor with a 20 year history of reliability. 

• Utilizes proven Smartlite® technology.

• Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.

• High static blowers - All models equipped with high static blowers.

• 60 second cooling cycle blower-off delay (TDR) - increases cooling performance when matched with a Nortek Global HVAC coil.

• Flexible category I venting system - May be vented with dedicated venting system or common vented with other category one appliances.

• High efficiency blower kits - Maximize efficiencies and provide better temperature control, humidity control and air distribution.

• Multi-speed direct drive blower - Energy efficient, brushless DC (ECM). 

• Designed to give a wide range of cooling capacities. 

• Switches on PCB, provide ultra easy motor speed selection.

• LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.

• Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.

• Integrated control board - Incorporates connections for electronic air cleaner and humidifier. 

• Ergonomically located for ease of service. 

• Two piece door design - Enhances furnace appearance and uses captured screws to prevent loosing door screws.

• Furnace Air Leakage - These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%. 

• Keep the conditioned air flowing to where it's needed.

Specifications:

Dimensions:

Product Height (in.): 34.5”

Product Width (in.): 17.50”

Product Depth (in.): 28”

Shipping Weight: 110 lbs.