Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM
Shipping options
Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM
General specs
- Product codeKG7SA-054C-T23A1
- ManufacturerFrigidaire
- SKUKG7SA-054C-T23A1
Dimensions
- Dimensions28.00in x 14.25in x 34.50in
- Weight95.00lb
Frigidaire KG7SA-054C-T23A1 54,000 Btu/h Upflow/Horizontal Gas Furnaces, 80% AFUE Single-Stage, ECM
Description:
The gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet.
The rounded corner jacket provides a pleasing “appliance appearance.”
General Features:
Variable Speed Direct Drive Blower - Energy-efficient, brushless DC (ECM) motor controls airflow to provide better temperature control, humidity control and air distribution.
100% fired and tested - All units and each component are tested on the manufacturing line.
Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.
30 second blower delay - At start-up assures a warm duct temperature at furnace start-up.
Adjustable blower off settings (60, 90, 120 and 180 seconds).
30 second post purge - Increases life of heat exchanger.
Two Stage Inducer - Optimizes efficiency on first stage heat and reduces sound levels.
Hot surface igniter - Innovative application of a silicon nitride type igniter.
Utilizes proven Smartlite® technology.
Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
Flexible category IV venting system - May be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation.
High Static Blowers - All models equipped with high static blowers.
Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.
Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life.
60 second fixed cooling cycle blower-off delay (TDR) - Increases cooling performance when matched with a Nortek Global HVAC coil.
LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.
Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
Incorporates integrated control board - With connections for electronic air cleaner and humidifier.
Ergonomically located for ease of service.
Two piece door design - Enhances furnace appearance and uses captured screws to prevent losing door screws.
Blower Compartment - Sealed door to reduce air leakage and insulated for ultra quiet operation.
Sealed Vestibule - Reduces burner and inducer sound levels.
Furnace Air Leakage - These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%.
Keep the conditioned air flowing to where it's needed.
Specifications:
Dimensions:
Product Height (in.): 34.5”
Product Width (in.): 14.25”
Product Depth (in.): 28”
Shipping Weight: 95 lbs.