-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Frigidaire FSA3BF4M2SN36K 3 Ton Extra High Efficiency Air Conditioner, 15.2 SEER2, Two-Stage
Frigidaire FSA3BF4M2SN36K 3 Ton Extra High Efficiency Air Conditioner, 15.2 SEER2, Two-Stage
General specs
- Product codeFSA3BF4M2SN36K
- ManufacturerFrigidaire
- SKUFSA3BF4M2SN36K
Dimensions
- Dimensions31.75in x 31.75in x 45.50in
- Weight208.00lb
Frigidaire FSA3BF4M2SN36K 3 Ton Extra High Efficiency Air Conditioner, 15.2 SEER2, Two-Stage
Description:
The FSA3BF Series air conditioners offer exceptional performance.
The unit, when combined with our engineered coils or air handlers, offers a line of quality, 15.2 SEER2 split system cooling equipment.
General Features:
The two stage compressor operates at 2 different capacity points to provide superior comfort and efficiency.
Copeland's proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation.
Designed Using Galvanized Steel - With powder-coated paint with a gloss finish that eliminates sharp edges and reduces scratching.
It passes 950 hours of salt spray per ASTM Std. B117.
Composite Base Pan - Absorbs sound and is corrosion resistant.
Composite is also stronger and lighter than steel.
Engineered to significantly reduce unwanted compressor noise.
Swept-Wing Fan Blade - Designed to significantly reduce unwanted noise.
Removable Top Grille Assembly - Allows ease of service from the top without disconnecting fan motor leads.
Low Pressure Switch - Loss of charge protection ensures long compressor life. Auto-reset feature prevents nuisance service visits.
Protects against abnormally high system pressures.
Auto-reset feature prevents nuisance service visits.
Liquid Line Filter Drier - Included with unit field installed.
One Piece Top/Orifice - Designed for maximum airflow and quiet operation.
Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit.
All aluminum coils in all models which provides high corrosion resistance.
Servicer-Friendly Jacket - Side panels can be easily removed and replaced without removing the top grill.
Specifications:
Cooling Capacity | 36,000 Btu/h |
SEER2 | 15.2 |
Volts-Cycles-Phase | 208/230-60-1 |
Stages | Two-Stage |
Delay Fuse Max. | 30 |
Min. Circuit Ampacity | 19.1 |
Fan Motor | 1/4 HP |
Compressor LRA | 84.2 |
Refrigerant | R-410A |
Suction Line O.D. | 3/4" |
Liquid line O.D. | 3/8" |
Sound Rating | 76 dBA |
Dimensions:
Product Height (in.): 45.5”
Product Width (in.): 31.75”
Product Depth (in.): 31.75”
Shipping Weight: 208 lbs.