Frigidaire FG7TC-080D-V35C1 80,000 Btu/h Condensing Upflow/Horizontal Gas Furnaces, 95% AFUE Two-Stage, Variable Speed

Frigidaire FG7TC-080D-V35C1 80,000 Btu/h Condensing Upflow/Horizontal Gas Furnaces, 95% AFUE Two-Stage, Variable Speed

Description:

• The high efficiency upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. 

• Upflow/horizontal units come ready for upflow or horizontal application. 

• The extended flush jacket provides a pleasing “appliance appearance.”

General Features:

• Variable Speed Direct Drive Blower - Energy-efficient, brushless DC (ECM) motor controls airflow to provide better temperature control, humidity control and air distribution.

• 100% fired and tested - All units and each component are tested on the manufacturing line.

• Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.

• 30 second blower delay - At start-up assures a warm duct temperature at furnace start-up. 

• Adjustable blower off settings (60, 90, 120 and 180 seconds).

• 30 second post purge - Increases life of heat exchanger.

• Two Stage Inducer - Optimizes efficiency on first stage heat and reduces sound levels.

• Hot surface igniter - Innovative application of a silicon nitride type igniter. 

• Utilizes proven Smartlite® technology.

• Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.

• Flexible category IV venting system - May be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation.

• High Static Blowers - All models equipped with high static blowers.

• Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.

• Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life.

• 60 second fixed cooling cycle blower-off delay (TDR) - Increases cooling performance when matched with a Nortek Global HVAC coil.

• LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.

• Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.

• Incorporates integrated control board - With connections for electronic air cleaner and humidifier. 

• Ergonomically located for ease of service.

• Two piece door design - Enhances furnace appearance and uses captured screws to prevent losing door screws.

• Blower Compartment - Sealed door to reduce air leakage and insulated for ultra quiet operation.

• Sealed Vestibule - Reduces burner and inducer sound levels.

• Furnace Air Leakage - These furnaces comply with Energy Star cabinet air leakage requirement of less than or equal to 2%. 

• Keep the conditioned air flowing to where it's needed.

• PolyPro by DuraVent - These furnaces have been tested with and are approved to be installed with DuraVent’s PolyPro venting system.

Specifications:

Dimensions:

Product Height (in.): 34.5”

Product Width (in.): 21”

Product Depth (in.): 28”

Shipping Weight: 140 lbs.