-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Friedrich SH20M50B 20,000 Btu Hazardgard Series Air Conditioner, 8.8 EER
Friedrich SH20M50B 20,000 Btu Hazardgard Series Air Conditioner, 8.8 EER
General specs
- Product codeSH20M50B
- ManufacturerFriedrich
- SKUSH20M50B
Dimensions
- Dimensions27.38in x 25.93in x 17.94in
- Weight171.00lb
Friedrich SH20M50B 20,000 Btu Hazardgard Series Air Conditioner, 50 HERTZ, 8.8 EER
Description:
Hazardgard Series air conditioners are specifically designed for use in areas where specific volatile flammable liquids or gasses are handled or used within enclosed containers or systems.
Hazardgard air conditioners are a great solution for offshore oil rigs, refineries, furniture workshops or other workshops where paints and varnishes are stored and used, as well as many other enclosed spaces where hazardous materials are processed or stored.
For more than 30 years, the Friedrich Hazardgard has endured some of the toughest and most unforgiving operating conditions imaginable.
Time-tested in the field where it counts, Hazardgard is trusted by professionals who have to get the job done.
Details like 33% thicker fins help extend the life of the coil.
General Features:
Unit surface temperatures will not rise above 135° C/275° F.
Operates at low ambient conditions without freezing at outdoor ambient temperatures as low as 7° C/45° F.
Tolerates higher outdoor temperatures up to 55° C /130° F. Permanent split capacitor motor.
Hot gas bypass for cooling operation at low ambient temperatures, down to 45ºF / 7ºC without freezing.
Designed to tolerate high ambient temperatures, allowing units to operate in T3 conditions.
Hermetically sealed refrigeration system.
Environmentally sealed on/off switch and gold plated contacts in thermostat for corrosion resistance.
Solid-state control relays for compressor and fan operation.
Commercial grade, enclosed fan motor with hermetically sealed overload for arc-free operation.
Direct-wired (field supplied), 15-amp circuit with time delay fuse that will tolerate current surge without tripping the breaker.
Powder Coated 22-gauge, G60 steel air conditioner cabinet for corrosion protection and to withstand years of hard use.
Stainless Steel Fan Shaft.
Specifications:
Cooling Capacity Btu/Hr | 21000/19100 |
Volts Rated | 240/220 |
Cooling Amps | 11.6/10.3 |
Cooling Capacity (KW) | 6.15 |
EER | 8.8 |
Moisture Removal Pints/ Hr | 7.0 |
Air Circulation CFM | 425 |
Refrigerant | R-410A |
Dimensions:
Product Height (in.): 17.938”
Product Width (in.): 25.934”
Product Depth (in.): 27.375”
Unit Weight: 171 lbs.