-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Friedrich PZH15K5SB 1.25 Ton PTAC Air Conditioner With Heat Pump, 10.2 EER
Friedrich PZH15K5SB 1.25 Ton PTAC Air Conditioner With Heat Pump, 10.2 EER
General specs
- Product codePZH15K5SB
- ManufacturerFriedrich
- SKUPZH15K5SB
Dimensions
- Dimensions21.50in x 42.00in x 16.00in
- Weight117.00lb
Friedrich PZH15K5SB 1.25 Ton PTAC Air Conditioner With Heat Pump, 10.2 EER
Description:
Friedrich Packaged Terminal Air Conditioners (PTACs) are known for being feature-rich, excellent energy efficiency, reliable performance and backed by an outstanding warranty.
With a fresh design for outstanding energy efficiency, the Zoneaire Select Series advance coil design maximizes the inner surface area to deliver higher EER efficiencies of up to 12 and COP up to 3.55. Offering 14,500 BTU cooling capacity and 13,600 BTU heating capacity, this Energy Smart Packaged Terminal Air Conditioner has 10.2 EER, 3 Moisture Removal (pints / hr.), 52 dB, R410A Refrigerant, and 208-230 Volts.
Friedrich Packaged Terminal Air Conditioners are built to offer years of reliable results and designed for maximum comfort while being nicely integrated into space and installed where they are least obtrusive-and most efficient in silently and gently directing treated air to every corner of the room.
General Features:
Constant room comfort monitoring
“Instant Heat” heat pump mode quickly heats a room to the desired temperature for increased comfort
Even heat monitoring checks room temperature and automatically adds heat boost if necessary
Room freeze protection- heat initiated if temperature falls to 40°F in an unoccupied
room, raising temperature to 46°F
Dual motors for quiet operation
Durable, powder coat paint finish
Indoor coil frost sensor protects the compressor to lengthen the life of the unit
Random compressor restart protects electrical systems from overload when power is restored
Separate heat and cool range limits
Central desk control ready allowing hotel owners to control units from a central location
Condensate removal systems uses slinger ring technology
Electronic defrost control ensures more run time in the efficient heat pump mode
Fresh air damper control to bring in fresh outside air when desired
Washable, easy access air filters
Service error code memory storage
Emergency heat override
Specifications:
Cooling Btu | 14500/14300 |
Cooling Watts | 1420/1400 |
EER | 10.2 |
Heater Size (kW) | 5.0 |
Reverse Heating Btu | 13600/13200 |
Heating Watts | 1180/1150 |
COP | 3.38/3.36 |
Moisture Removal (pints/hr.) | 3.0 |
Sensible Heat Ratio | 72% |
Voltage | 230/208V-60Hz-1P |
Current (Amps) | 9.6 |
Compressor LRA | 34.5 |
Compressor RLA | 5.75/6.35 |
Outdoor Fan Motor, HP | 0.09 |
Indoor CFM, High | 470 |
Indoor CFM, Low | 420 |
Vent CFM | 75 |
Refrigerant | R-410A |
Dimensions:
Product Height (in.): 16”
Product Width (in.): 42”
Product Depth (in.): 21.5”
Unit Weight: 117 lbs.