-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- More categories
Friedrich PVH12K3FB 1 Ton PTAC Air Conditioner With Heat Pump, 11.5 EER
Friedrich PVH12K3FB 1 Ton PTAC Air Conditioner With Heat Pump, 11.5 EER
General specs
- Product codePVH12K3FB
- ManufacturerFriedrich
- SKUPVH12K3FB
Dimensions
- Dimensions21.00in x 42.00in x 16.00in
- Weight137.00lb
Friedrich PVH12K3FB 1 Ton PTAC Air Conditioner With Heat Pump, 11.5 EER
Description:
Friedrich's FreshAire® PTAC system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space.
Patents-pending technology uses the inverter compressor and main cooling system to optimize temperature and humidity level of incoming air.
The variable-speed operation of the FreshAire PTAC allows the unit to work at the optimal speed to match the true load of the room.
This not only provides the best energy consumption curve but it also adds to guest comfort by eliminating the harsh start-ups associated with single speed compressors.
General Features:
Constant room comfort monitoring “Instant Heat” heat pump mode quickly heats a room to the desired temperature for increased comfort
Even heat monitoring checks room temperature and automatically adds heat boost if necessary
Room freeze protection - heat initiated if temperature falls to 40°F in an unoccupied room, raising temperature to 46°F
Dual motors for quiet operation
Durable, powder coat paint finish
Indoor coil frost sensor protects the compressor to lengthen the life of the unit
Separate heat and cool range limits
Central desk control ready allowing hotel owners to control units from a central location
2-speed FreshAire fan
RS-385 Communication port
Condensate removal systems uses slinger ring technology
Electronic defrost control ensures more run time in the efficient heat pump mode
Washable, easy access air filters
Service error code memory storage
Emergency heat override
Specifications:
Cooling Capacity | 12000/11800 Btu |
Cooling Watts | 1050/1035 |
EER | 11.5 |
Heater Size (kW) | 3.6 |
Reverse Heating Capacity BTU | 11800/11600 |
Heating Watts | 970/950 |
COP | 3.5 |
Moisture Removal (pints/hr.) | 1.9 |
Sensible Heat Ratio | 83% |
Voltage | 230/208V (1 Phase, 60 Hz) |
Current | 4.5/5.0 Amps |
Reverse Heat | 4.6/4.9 Amps |
Compressor LRA | N/A |
Compressor RLA | 4.1 |
Outdoor Fan Motor | 0.09 HP |
Indoor CFM, High | 470 |
Indoor CFM, Low | 360 |
Refrigerant Type | R-410A |
Dimensions:
Product Height (in.): 16"
Product Width (in.): 42"
Product Depth (in.): 21”
Unit Weight: 137 lbs.