-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Friedrich PVH09K3FB 0.75 Ton PTAC Air Conditioner With Heat Pump, 12.1 EER
Friedrich PVH09K3FB 0.75 Ton PTAC Air Conditioner With Heat Pump, 12.1 EER
General specs
- Product codePVH09K3FB
- ManufacturerFriedrich
- SKUPVH09K3FB
Dimensions
- Dimensions21.00in x 42.00in x 16.00in
- Weight128.00lb
Friedrich PVH09K3FB 0.75 Ton PTAC Air Conditioner With Heat Pump, 12.1 EER
Description:
Friedrich FreshAire Series PTAC units are the most advanced PTAC units.
The FreshAire line features a fully integrated make-up air system while still offering the quiet sound levels and efficiency levels you have come to expect from Friedrich.
This AC Unit is a 9,600 BTU cooling PTAC with 8,500 BTUs reverse cycle heat pump as well as back-up electric resistive heat.
Additionally, it boasts an EER of 12.1, making it an efficient system to cool your smaller areas.
It uses 265V electricity and has a 2 speed fan plus auto for better circulation.
The FreshAire System brings in additional outside air which passes through a MERV 8 filter and then mixes with return air from the room.
It is then conditioned (heated or cooled) with the return air before it is reintroduced into your space.
General Features:
Constant room comfort monitoring “Instant Heat” heat pump mode quickly heats a room to the desired temperature for increased comfort
Even heat monitoring checks room temperature and automatically adds heat boost if necessary
Room freeze protection - heat initiated if temperature falls to 40°F in an unoccupied room, raising temperature to 46°F
Dual motors for quiet operation
Durable, powder coat paint finish
Indoor coil frost sensor protects the compressor to lengthen the life of the unit
Separate heat and cool range limits
Central desk control ready allowing hotel owners to control units from a central location
2-speed FreshAire fan
RS-385 Communication port
Condensate removal systems uses slinger ring technology
Electronic defrost control ensures more run time in the efficient heat pump mode
Washable, easy access air filters
Service error code memory storage
Emergency heat override
Specifications:
Cooling Capacity | 9600/9400 Btu |
Cooling Watts | 815/800 |
EER | 12.1 |
Heater Size (kW) | 3.6 |
Reverse Heating Capacity BTU | 8500/8200 |
Heating Watts | 710/685 |
COP | 3.5 |
Moisture Removal (pints/hr.) | 1.4 |
Sensible Heat Ratio | 80% |
Voltage | 230/208V (1 Phase, 60 Hz) |
Current | 4.4/4.5 Amps |
Reverse Heat | 4.0/4.1 Amps |
Compressor LRA | N/A |
Compressor RLA | 3.2 |
Outdoor Fan Motor | 0.06 HP |
Indoor CFM, High | 400 |
Indoor CFM, Low | 250 |
Refrigerant Type | R-410A |
Dimensions:
Product Height (in.): 16"
Product Width (in.): 42"
Product Depth (in.): 21”
Unit Weight: 128 lbs.