-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Mini-Splits & Accessories
- Concealed Indoor Units
- Ducted Air Handler
- Ducted Mini-Split Air Handler
- Ductless Accessories
- Electric Heater Module
- Indoor Ceiling Cassettes
- Indoor Wall Mounted
- Intelli-HEAT Coil
- Mini Split Wire & Cable
- Mini-Split Risers
- Mitsubishi Mini-Splits
- Mr. Cool Ductless Mini-Splits
- Outdoor Units, Multi-Zone
- Outdoor Units, Single-Zone
- ProFit Quick Connect Fittings
- More categories
Friedrich PDH12R3SGR3 1 Ton Commercial PTAC Air Conditioner With Heat Pump - R32, 11.6 EER
Friedrich PDH12R3SGR3 1 Ton Commercial PTAC Air Conditioner With Heat Pump - R32, 11.6 EER
General specs
- Product codePDH12R3SGR3
- ManufacturerFriedrich
- SKUPDH12R3SGR3
Dimensions
- Dimensions21.00in x 42.00in x 16.00in
- Weight119.00lb
Friedrich PDH12R3SGR3 1 Ton Commercial PTAC Air Conditioner With Heat Pump - R32, 11.6 EER
Description:
Friedrich PTAC units are super quiet and efficient.
These can be used in hotels and homes alike.
They are packed with features and are backed with the reliability you have come to expect from Friedrich.
The PDH12R3SGR3 Friedrich Premier line PTAC unit proudly includes R32 refrigerant.
R32 is up to 12% more efficient than R410A, resulting in lower Global Warming Potential (GWP).
The lower the GWP, the better for the environment.
General Features:
Constant room comfort monitoring “Instant Heat” heat pump mode quickly heats a room to the desired temperature for increased comfort
Even heat monitoring checks room temperature and automatically adds heat boost if necessary
Room freeze protection - heat initiated if temperature falls to 40°F in an unoccupied room, raising temperature to 46°F
Dual motors for quiet operation
FreshAire® IAQ Ready
Durable, powder coat paint finish
Indoor coil frost sensor protects the compressor to lengthen the life of the unit
Random compressor restart protects electrical systems from overload when power is restored
Separate heat and cool range limits
Desk control ready allowing hotel owners to control units from a central location
Condensate removal system uses slinger ring technology
Electronic defrost control ensures more run time in the efficient heat pump mode
Fresh air damper control to bring in fresh outside air when desired
Washable, easy access air filters
Service error code memory storage
Emergency heat override
Specifications:
Cooling BTU | 12000 |
Cooling Watts | 1030 |
EER | 11.6 |
Heater Size (kW) | 3.6 |
Reverse Heating Capacity BTU | 10700 |
Heating Watts | 920 |
COP | 3.4 W |
Moisture Removal (pints/hr.) | 2.75 |
Sensible Heat Ratio | 70% |
Voltage | 265V (1 Phase, 60 Hz) |
Cooling | 4 Amps |
Reverse Heat | 3.5 Amps |
Compressor LRA | 21 |
Compressor RLA | 4.5 |
Outdoor Fan Motor | 0.08 HP |
Indoor CFM, High | 341 |
Indoor CFM, Low | 306 |
Refrigerant Type | R32 |
Outdoor Air | 52 |
Dimensions:
Product Height (in.): 16"
Product Width (in.): 42"
Product Depth (in.): 21”
Unit Weight: 119 lbs.