-
Categories
HVAC Equipment & Parts
- Air Handlers
- Air-To-Water Heat Pumps
- Condensate Overflow Shut-off Switches
- Condensate Removal & Management
- Condenser Pads
- Condensers (Outdoor Units)
- E-Z Traps
- Electric Heat Kits
- Furnaces
- Gas Furnace and A/C Systems
- Gas-Fired Unit Heaters
- Geothermal Units
- Goodman Replacement Parts
- Heat Pumps
- Indoor Units
- Install & Duct Tape
- Installation Accessories
- Linesets
- Miscellaneous Supplies
- Mounting Brackets
- Mr. Cool Universal Series
- Packaged Units
- Portable AC and Heat Units
- Refrigerant Coils
- Secondary Drain Pans
- Service Parts
- Sheet Metal Duct & Fittings
- Surge Protection
- Thermostats and Thermostat Wire
- Through The Wall Units
- Window Units
- More categories
Friedrich FSHSR24B3B 2 Ton Single Zone Select Series Outdoor Unit, R32 - 19.5 SEER2
Friedrich FSHSR24B3B 2 Ton Single Zone Select Series Outdoor Unit, R32 - 19.5 SEER2
General specs
- Product codeFSHSR24B3B
- ManufacturerFriedrich
- SKUFSHSR24B3B
Dimensions
- Dimensions13.38in x 35.44in x 29.50in
- Weight101.40 lb
Friedrich FSHSR24B3B 2 Ton Floating Air Select Series Outdoor Unit, 230V - R32 - 19.5 SEER2
Description:
The Friedrich FSHSR24B3B 24,000 BTU Floating Air Select Series condenser is a single zone outdoor unit.
It can be used with the Friedrich FAHFW24A3B Wall Unit.
The Friedrich Floating Air Select Series Single Zone Systems feature high efficiency ratings, low ambient heating and cooling capacities.
The Friedrich FSHW243A is rated for 24,000 BTU cooling and 24,000 BTUs heating capacity.
It will operate in the cooling mode with outdoor temperatures as low as 5°F.
In the heating mode it will continue to operate down to -4°F.
While it cannot be used as your primary heat source in the majority of the country, it is an option for secondary heat!
Outdoor unit comes pre-charged with refrigerant sufficient for 25 ft. of line.
General Features:
Inverter Technology for energy efficiency and self-adjusting capacity to meet your cooling requirements
Easy installation - Your system will be up and running in just a few short hours in most cases.
Low installed cost - Ductless systems have a clear advantage over central air conditioning when ducts are not already present
Lower utility bills - Unlike central air conditioners that cool all the areas the same, ductless systems cool only those rooms you tell it to.
No more wasted dollars on cooling unused rooms
Ultra quiet operation - Ductless systems are in sharp contrast to other types of air conditioners where the rush of air from ducted vents can be annoying, or where compressor noise of window units can be objectionable
Permanent installation - Unlike traditional window air conditioners, ductless split systems leave window views unobstructed.
And, because it is a permanent installation, there is nothing to remove or store over the winter.
Specifications:
Capacity Cooling BTUs | 24,000 |
Capacity Heating BTUs | 24,000 |
Sensible Heat Ratio | 70% |
COP | 3.3 |
HSPF2 | 8.5 |
SEER2 | 19.5 |
EER2 | 10.6 |
Moisture Removal Pts/h | 4.6 |
Airflow (High/Med/Low/Quiet) | 705/647/558/441 CFM |
Sound Rating | 60 dB-A |
Operating Range - Heating | -4°F - 75°F |
Operating Range - Cooling | 5°F - 118°F |
Voltage | 230/208V-60Hz-1P |
Min. Ampacity | 21.0 A |
Cooling Watts | 2264 W |
Cooling Amps | 10.0 A |
Heating Watts | 2132 W |
Heating Amps | 9.5 A |
Max. TD Fuse/Breaker | 35 A |
Refrigerant | R-32 |
Compressor Type | Rotary Inverter |
Connections | Flared |
Liquid Line | 3/8" |
Suction Line | 5/8" |
Dimensions:
Product Height (in.): 29.5”
Product Width (in.): 35.4375”
Product Depth (in.): 13.375”
Unit Weight: 101.4 lbs.